Product Description
| Trade Size | Outside Diameters ( inch – mm ) | Minimum Wall Thickness ( inch – mm ) | ||
|
inch – mm |
Maximum |
Minimum |
Schedule 40 |
Schedule 80 |
|
1/2 – 16 |
0.848 – 21.54 |
0.832 – 21.13 |
0.109 – 2.77 |
0.147 – 3.73 |
|
3/4 -21 |
1.060 – 26.92 |
1.040 – 26.42 |
0.113 – 2.87 |
0.154 – 3.91 |
|
1 – 27 |
1.325 – 33.66 |
1.305 – 33.15 |
0.133 – 3.38 |
0.179 – 4.55 |
|
1-1/4 – 35 |
1.672 – 42.47 |
1.648 – 41.86 |
0.140 – 3.56 |
0.191 – 4.85 |
|
1-1/2 – 41 |
1.912 – 48.56 |
1.888 – 47.96 |
0.145 – 3.68 |
0.200 – 5.08 |
|
2 – 53 |
2.387 – 60.63 |
2.363 – 60.02 |
0.154 – 3.91 |
0.218 – 5.54 |
|
2-1/2 – 62 |
2.890 – 73.41 |
2.860 – 72.64 |
0.203 – 5.16 |
0.276 – 7.01 |
|
3 – 78 |
3.515 – 89.28 |
3.485 – 88.52 |
0.216 – 5.49 |
0.300 – 7.62 |
|
3-1/2 – 91 |
4.050 – 102.87 |
3.950 – 100.33 |
0.226 – 5.74 |
0.318 – 8.08 |
|
4 – 103 |
4.550 – 115.57 |
4.450 – 113.03 |
0.237 – 6.03 |
0.337 – 8.56 |
|
5 – 129 |
5.613 – 142.57 |
5.513 – 140.03 |
0.258 – 6.55 |
0.375 – 9.52 |
|
6 – 155 |
6.675 – 169.54 |
6.575 – 167.00 |
0.280 – 7.11 |
0.432 – 10.97 |
INTRODUCTION
The main raw material of PVC-U piping network is PVC resin, which is added moderate stabilizer, lubricant, fillers, and toner. After the
process of mixing, extrusion, sizing, cooling, and cutting, the PVC-U pipe can be made. The PVC-U fittings are made by injection. The
PVC-U material doesn’t readily conduct electricity, which can undertake more than 25KV voltage. The PVC-U material has very good
chemical properties, physical property and insulating property, which can suit for most of the normal insulation protection
application.
This series of PVC-U insulting electrical pipes and fittings are suit for CSA & UL standard.
FEATURES OF PRODUCT
High Insulating Property:
PVC-U material resists the electricity, which can undertake more than 25KV voltage.
High Impact Resistance:
This material of pipes and fittings can suit to be laid in the concrete.
Non – flammable:
PVC-U material has high limiting oxygen index, which is very difficult to burn, and has died out by itself, when it is away from the fire.
Corrosion Resistant:
PVC-U material has strong resistance to most of acid and alkali. No rust, no antiseptic treatment. The service life is 4 times than that
of cast iron.
Light Weight and Easy Installation:
Weight is very light. The density of PVC-U is only 1/5 to 1/6 of that of cast iron. The method of connection is very simple, and the
process of installation is very quickly.
High Tensile Strength:
PVC-U has high tensile strength, and high shock strength. The piping network of PVC-U is not easy to break, and it works safety.
Long Service Life:
The piping network with normal material can be used around 20 to 30 years, but the PVC-U piping network can be used longer than
50 years.
Cheaper Prices:
The price of PVC-U piping network are cheaper than that of cast iron.
FIELDS OF APPLICATION
Piping networks for power or lighting in building.
Piping networks for being laid in the concrete or wall.
Piping networks for post, telecommunications, and network cabling.
SERVICE
1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.
2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.
3. We also supply the connectors Accordingly.
4. We can offer you very competitive prices for some pipes.
5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.
6. It is my pleasure to help you.
7.If you need more customized services and offers,Please Contact Us.
MORE PRODUCT
OUR ADVANTAGE
1.high quality&industrial leading price
2.quick order processing & on-time delivery
3.extremely long usage life for at least 5 years
4.innovative & customer-oriented
5.rich experience in exportation
6.best quality & best service with competitive price
7.easy and fast installation, making cost minimized
8.healthy and non-toxic, free of stain,recycable, enviromentally friendly
9.Modern technical equipment in combination with proficient manual work.
10.Lightweight, convenient to transport and handle, good for labor-saving.
ABOUT TIANYAN
(1) CHINAMFG Factory
It is a CHINAMFG solution provider for plastic piping system in the world,whose customers come from more than 60 countries and regions.Building piping system application,industrial piping system application,agricultural piping system application,and their professional solutions are the mainly business
(2) Customization
(3) Social Responsibility
(4) 6S Management
(5) Certificate
(6) Process Quality Control
(7) Each Process is CareFully Made
(8) Packing & Delivery
FAQ
1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE, SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | PVC |
|---|---|
| Color: | Grey ,White |
| Standard: | UL514b |
| Transport Package: | Packed Into Poly Bags, Then Into Cartons. The Size |
| Specification: | 1/2"~8" |
| Trademark: | TY/OEM |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the environmental benefits of using plastic bushings, and how do they contribute to sustainability?
Plastic bushings offer several environmental benefits and contribute to sustainability in various ways. Here are some of the key advantages:
- Reduced Energy Consumption: Plastic bushings generally have lower friction coefficients compared to metal bushings, which results in reduced energy consumption. The lower friction allows for smoother operation and requires less power to overcome resistance, leading to energy savings. This can be particularly significant in applications with high-speed or continuous motion, where energy efficiency is crucial.
- Elimination of Lubrication: Many plastic bushings are self-lubricating or require minimal lubrication. Unlike metal bushings, which often require regular lubrication to maintain optimal performance, plastic bushings can operate effectively without the need for lubricants. This eliminates the need for oil or grease, reducing the consumption of lubrication products and minimizing the associated environmental impacts, such as oil spills or the disposal of used lubricants.
- Corrosion Resistance: Plastic bushings are generally resistant to corrosion, which can be a significant advantage in various environments. Unlike metal bushings, which may corrode and require frequent replacement, plastic bushings can withstand exposure to moisture, chemicals, and other corrosive substances. This extended service life reduces the frequency of bushing replacements, leading to less material waste and lower environmental impact.
- Weight Reduction: Plastic bushings are typically lighter than their metal counterparts, contributing to weight reduction in machinery and equipment. The use of lighter components can result in lower energy consumption during operation, especially in applications that involve frequent acceleration or deceleration. Additionally, reduced weight can lead to more efficient transportation and decreased fuel consumption during shipping.
- Recyclability: Many plastic bushing materials are recyclable, allowing for the recovery and reuse of the materials at the end of their service life. Plastic bushings made from recyclable materials can be collected, processed, and transformed into new products, reducing the demand for virgin materials and minimizing waste generation. Proper disposal and recycling practices contribute to a circular economy and the conservation of natural resources.
- Noise Reduction: Plastic bushings often exhibit superior damping properties compared to metal bushings, resulting in reduced noise and vibration levels. This can be advantageous in applications where noise reduction is important, such as in residential or office environments. By minimizing noise pollution, plastic bushings contribute to improved working conditions, increased comfort, and enhanced overall environmental quality.
By utilizing plastic bushings and benefiting from their environmental advantages, industries can contribute to sustainability efforts by reducing energy consumption, minimizing lubrication requirements, extending equipment lifespan, promoting recyclability, and improving overall operational efficiency. However, it is important to note that the sustainability of plastic bushings also depends on responsible manufacturing practices, proper disposal or recycling methods, and the selection of eco-friendly materials.
Where can I purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment?
If you are looking to purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment, there are several options available to you. Here are some places where you can find and purchase plastic bushings tailored for these industries:
- Industrial Suppliers and Distributors: Industrial suppliers and distributors specializing in components for specific industries often carry plastic bushings designed for automotive or medical applications. These suppliers have a wide range of products and can provide guidance on selecting the right bushings for your specific requirements. Search for reputable industrial suppliers or distributors that cater to the automotive or medical sectors, and inquire about their available plastic bushing options.
- Online Marketplaces and E-commerce Platforms: Online marketplaces and e-commerce platforms offer a convenient way to search for and purchase plastic bushings designed for specific industry applications. Platforms like Amazon, Alibaba, or ThomasNet have extensive catalogs of industrial components, including plastic bushings. Use relevant keywords such as “automotive plastic bushings” or “medical equipment bushings” to narrow down your search and explore the available options from different sellers.
- Manufacturer Websites: Visit the websites of reputable manufacturers that specialize in producing plastic bushings for specific industries. Many manufacturers provide detailed product information, specifications, and application guides on their websites. Identify manufacturers known for their expertise in automotive or medical applications, and explore their product offerings. Manufacturer websites often have contact information or online inquiry forms that allow you to directly reach out for purchasing inquiries.
- Trade Shows and Industry Events: Attend trade shows, exhibitions, or industry events related to the automotive or medical sectors. These events often feature a wide range of suppliers and manufacturers showcasing their products and innovations. It’s an excellent opportunity to connect with industry experts, explore the latest advancements in plastic bushings, and establish contacts with suppliers who specialize in serving specific industry applications.
- Local Distributors and Retailers: Check if there are local distributors or retailers in your area that specialize in supplying components to the automotive or medical industries. These distributors often have physical stores or warehouses where you can personally visit, browse their product offerings, and make purchases. Local distributors may also provide personalized support and expertise to help you find the right plastic bushings for your application.
When purchasing plastic bushings designed for specific industry applications, it’s important to consider factors such as material compatibility, performance requirements, and industry-specific certifications or standards. Ensure that the chosen plastic bushings meet the necessary specifications and regulations for the intended application.
By exploring these purchasing options and consulting with industry experts, you can find and purchase plastic bushings that are specifically designed for automotive or medical equipment, ensuring optimal performance and compatibility with the requirements of these industries.
Are there different types of plastic materials used in manufacturing plastic bushings, and how do they affect performance?
Yes, there are different types of plastic materials used in manufacturing plastic bushings, and the choice of material can significantly affect their performance. Here are some common types of plastic materials used in plastic bushings and how they can impact performance:
- Nylon: Nylon is a widely used material for plastic bushings. It offers good wear resistance, low friction, and excellent load-carrying capacity. Nylon bushings are self-lubricating, reducing the need for additional lubrication. They are suitable for a wide range of applications and can operate in both dry and lubricated conditions.
- PTFE (Polytetrafluoroethylene): PTFE, commonly known by the brand name Teflon, is a high-performance plastic material with exceptional low-friction properties. PTFE bushings have excellent chemical resistance, operate well in high-temperature environments, and exhibit low wear rates. They are often used in demanding applications where high precision and low friction are critical.
- UHMW (Ultra-High-Molecular-Weight Polyethylene): UHMW is a durable and tough plastic material known for its high impact strength and abrasion resistance. UHMW bushings offer low friction, good chemical resistance, and excellent wear properties. They are commonly used in applications involving heavy loads, impact, or abrasive conditions.
- POM (Polyoxymethylene): POM, also known as acetal or Delrin, is a high-strength engineering plastic with good dimensional stability and low friction. POM bushings exhibit low moisture absorption, excellent wear resistance, and a low coefficient of friction against metal surfaces. They are suitable for applications requiring high precision, low wear, and resistance to moisture or chemicals.
- Composite Polymers: Composite polymers are materials that combine different plastic resins or incorporate reinforcing fibers or fillers. These composite materials can offer enhanced mechanical properties such as increased strength, improved wear resistance, or reduced friction. Composite polymer bushings are tailored for specific applications, and the choice of composite formulation depends on the desired performance characteristics.
The choice of plastic material for a specific application depends on various factors, including the operating conditions, load requirements, temperature range, speed, and environmental factors. Each plastic material has its own unique properties and advantages, which make them suitable for specific applications. For example, nylon bushings may be preferred for their balanced performance and versatility, while PTFE bushings excel in applications requiring low friction and high temperature resistance.
When selecting a plastic material for bushings, it’s important to consider factors such as load capacity, wear resistance, coefficient of friction, chemical resistance, temperature range, and compatibility with mating surfaces. Manufacturers and suppliers of plastic bushings can provide guidance on selecting the appropriate material based on your specific application requirements.
It’s worth noting that the performance of plastic bushings can be influenced by factors such as design considerations, surface finish, mating materials, and operating conditions. Proper installation, regular maintenance, and adherence to manufacturer guidelines are crucial for achieving optimal performance and longevity of plastic bushings in industrial applications.
By understanding the different types of plastic materials available and their impact on performance, you can make informed decisions when selecting plastic bushings for your specific application needs.
editor by CX 2024-02-20