Tag Archives: bushing custom

China Hot selling PA6 Nylon Black or White Processing Parts Plastic Shaft Sleeve/Flange/Washer Injection Mold Bushing Custom PP/PTFE/POM Material. bronze bushing

Product Description

Special-Shaped Titanium Ti Evaporation Crucible Factory

Product Description

Here are some products that can be made using MIM (Metal Injection Molding) process:

1. Medical implants and devices, such as bone screws, dental implants, and surgical instruments.
2. Firearms components, including triggers, hammers, and other small parts.
3. Aerospace and defense parts, such as gears, brackets, and housings.
4. Electronics components, including connectors, switches, and small gears.
5. Automotive components, including engine components, brake system components, and suspension parts.
6. Jewelry components, including clasps, bezels, and decorative elements.
7. Consumer goods parts, such as eyeglass frames, watch components, and small gadgets.
8. Industrial tool parts, including inserts, blades, and cutting tools.
9. Musical instrument components, such as guitar parts and trumpet valves.
10. Sporting equipment components, including golf club heads, fishing reel parts, and bike components.

These are just a few examples of the many products that can be made using the MIM process. With its ability to produce complex geometries and high-quality finishes, MIM is an ideal manufacturing process for a wide range of industries and applications.

MIM Parts Tolerance
The tolerances for MIM (Metal Injection Molding) parts are typically very close and precise. In general, tolerances for MIM parts can be as tight as +/- 0.5% of the dimension, or +/- 0.005 inches (0.127 mm), whichever is greater. However, the specific tolerance requirements will depend on the application and the design of the part.
The MIM process is capable of producing complex shapes with high accuracy and repeatability, making it possible to achieve very tight tolerances. Additionally, the material properties of MIM parts are highly consistent, which further contributes to the precision and consistency of the final product.
It’s important to note that achieving tight tolerances may require additional steps, such as post-processing or secondary operations, to ensure that the parts meet the required specifications. Additionally, the cost of producing parts with tight tolerances can be higher due to the additional time and effort required to achieve them.

MIM Parts Advantage

1. Complex geometries: MIM can produce complex shapes and geometries that are difficult or even impossible to achieve with traditional manufacturing methods. This enables designers to create parts with intricate features and high functionality.
2. High precision: The MIM process can achieve very tight tolerances, making it possible to produce parts with high accuracy and consistency.
3. Excellent surface finish: MIM parts have a high-quality surface finish, which eliminates the need for additional finishing operations.
4. Versatility: MIM can produce parts from a range of materials, including stainless steel, low alloy steels, tool steels, titanium alloys, and more. This makes it possible to create parts with a wide range of mechanical properties and applications.
5. Cost-effective: MIM is a cost-effective manufacturing process, especially for small to medium-scale production runs. It can eliminate the need for multiple manufacturing steps and reduce material waste, resulting in lower overall costs.
Overall, MIM parts offer a range of benefits for manufacturers and customers alike, including the ability to create complex geometries, high precision, excellent surface finishes, versatility, and cost-effectiveness.

 

Detailed Photos

 

The MIM Process

the MIM (Metal Injection Molding) process can be broken down into several steps:

1. Formulation: The first step in the MIM process is to formulate the feedstock. This typically involves mixing a fine metal powder with a thermoplastic binder material and sometimes a lubricant. The binder material helps to hold the metal particles together and enables them to flow like plastic.

2. Injection molding: The feedstock is then injected into a mold cavity using an injection molding machine. The mold is typically made from steel or other durable materials and is designed to produce the desired shape of the final part.

3. Debinding: Once the part has been molded, it is subjected to a debinding process, which removes the binder material from the metal particles. This is typically done by heating the part in a CHINAMFG or using a solvent.

4. Sintering: After debinding, the part is subjected to a high-temperature sintering process. This process fuses the metal particles together, forming a CHINAMFG metal part with the desired mechanical properties. The sintering process can take several hours to complete, depending on the size and complexity of the part.

5. Finishing: After sintering, the final part may undergo additional finishing operations, such as polishing, machining, or plating, to achieve the desired surface finish and tolerances.

Overall, the MIM process is a highly versatile and precise manufacturing method that is capable of producing complex metal parts with high accuracy and consistency. It is often used in industries such as medical devices, firearms, aerospace, electronics, and automotive, where precision, complexity, and cost-effectiveness are key considerations.

 

Product Parameters

The Material of the MIM Product

Material System Material Composition Typical Applications
Low Alloy Steel Fe-2Ni , Fe-8Ni Automobile, machinery, and other industries, particularly in structural parts
Stainless Steel 316L,17-4PH,420,440C Medical equipment, clocks, watches
Carbide WC-Co Various tools, clocks, watches
Ceramic Al2O3 ,ZrO2 ,SiO2 IT electronics, daily necessities, watches
Heavy Alloys W-Ni-Fe,W-Ni-Cu,W-Cu The arms industry, communications, daily necessities
Titanium Ti,Ti-6Al-4V Medical and Firearm structural parts
Magnetic Materials Fe, NdFeB,SmCo5, Fe-Si Magnetic properties of the various components
Tool Steel CrMo4,M2 Tools

Typical properties of several MIM materials

Materials Density Hardness Tensile Strength Elongation
g/cm³ Rockwell Mpa %
Fe-based alloys MIM-2200(Sintered) 7.65 45HRB 290 40
MIM-2700(Sintered) 7.65 69HRB 440 26
MIM-4605(Sintered) 7.62 62HRB 415 15
MIM-4605(Quenching and tempering) 7.62 48HRC 1655 2
Stainless steel MIM-316L(Sintered) 7.92 67HB 520 50
MIM-17-4PH(Sintered) 7.5 27HRC 900 6
MIM-17-4PH(Sintered) 7.5 40HRC 1185 6
MIM-430L(Sintered) 7.5 65HRB 415 25
Tungsten alloys 95%W-Ni-Fe 18.1 30 960 25
97%W-Ni-Fe 18.5 33 940 15
Carbide YG8X 14.9 HRA90 Bending Strength 2300  
Fine Ceramics Al2O3 3.98 HRA92 Bending Strength 2300  

Packaging & Shipping

 

  1. We prefer DHL or TNT express or other air freight between 1kg-100kg.
  2. we choose sea freight of more than 100kg or more than 1CBM
  3. As per customized specifications.

 

Company Profile

About us

HangZhou CHINAMFG Technology Co., Ltd has been an established manufacturer since 2008. It is located in HangZhou City, ZheJiang Province, which is close to ZheJiang . The CHINAMFG Technology is fully equipped with all kinds of metal injection molding equipment and Powder Metallurgy equipment.
We specialize in tooling design and product development. We can work with materials such as low alloy steel, stainless steel, tool steel, and titanium steel. We serve a diverse range of applications in diverse industries – Automotive, Industrial, Electronics, and Medical. As 1 of the leading suppliers of metal parts in China, we offer high-quality, custom, precision parts at competitive prices according to customer drawings and specifications.

Our advantage in the industrial market is that we can provide competitive prices for our customers. We have a completely competitive metal parts provider and supply chain solution. With a strong focus on continual improvement, we only utilize best practices to ensure that the work we do for our customers is done in the most efficient, precise, and cost-effective way possible.
The focus of Machining Design Associated has been and always will be on developing and maintaining lasting relationships with customers. We are proud to be large enough to handle our customer needs yet small enough to offer the personal attention customers appreciate.

We have full OEM Experience worldwide, providing them with One-stop solutions for a broad range of applications. We believe in quality and on-time delivery is our corn idea in order to meet our customers’ requirements.

We look CHINAMFG to cooperating with you!

 

Our Advantages

Why Choice Emitech as your MIM parts supplier, there may be several reasons why they could be a good choice:
1. Experience: CHINAMFG may have significant experience in the MIM industry, with a proven track record of producing high-quality parts for various applications.
2. Precision: CHINAMFG may use advanced technology and equipment to manufacture MIM parts with tight tolerances and high precision, ensuring consistent quality.
3. Customization: CHINAMFG may work closely with its customers to develop customized MIM parts that meet specific requirements and specifications.
4. Material Variety: CHINAMFG may offer a wide range of material options for MIM, including stainless steel, low alloy steels, tool steels, titanium alloys, and more, enabling their customers to choose the best material for their applications.
5. Cost-effectiveness: CHINAMFG may offer competitive pricing for their MIM parts, making it a cost-effective option for small to medium-scale production runs.
If CHINAMFG meets your specific needs and requirements, they may be a good choice for your MIM parts supplier, based on factors such as experience, precision, customization, material variety, and cost-effectiveness.

After Sales Service

Factory Supply High Demand aluminum machining parts factory
We usually provide 12 Months of repair service. If our duty, we will respond to send the new parts.

Our Service

 

Our Processing CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping,
Surface finish Polishing, sandblasting, Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated,
Tolerance 0.05mm~0.1mm
QC System 100% inspection before shipment
Drawing format CAD / PDF/ DWG/ IGS/ STEP
Packaging Plastic bag/Standard package / Carton or Pallet / As per customized specifications
Payment Terms 30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable.
Trade terms EXW, FOB, and CIF, As per the customer’s request
Shipment Terms

1)We prefer DHL, TNT express, or other air freight between 1kg-100kg.

2) we prefer sea freight of more than 100kg or more than 1CBM
3) As per customized specifications.

Note The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Repaire
Warranty: Half a Year
Condition: New
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

Can I get recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery?

Yes, recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery can be obtained. When selecting plastic bushings for such applications, it is crucial to consider factors such as material compatibility, regulatory compliance, hygiene requirements, and resistance to chemicals and cleaning agents. Here are some options to help you find suitable plastic bushings:

  • Manufacturer Recommendations: Start by consulting manufacturers that specialize in producing plastic bushings for food processing or pharmaceutical applications. These manufacturers are knowledgeable about the specific requirements of these industries and can recommend bushing materials that comply with relevant regulations and standards. Contact their technical support teams or refer to their product documentation to obtain specific recommendations based on your application’s needs.
  • Industry Associations and Standards: Industry associations and regulatory bodies in the food processing and pharmaceutical sectors often provide guidelines and standards for equipment components, including bushings. Examples include organizations like the Food and Drug Administration (FDA) for food processing or the International Society for Pharmaceutical Engineering (ISPE) for pharmaceutical machinery. Refer to their guidelines or consult with industry experts to identify recommended materials and specifications for plastic bushings.
  • Specialty Suppliers: Look for specialty suppliers that focus on providing components for food processing or pharmaceutical machinery. These suppliers often have a range of plastic bushings specifically designed and certified for use in these industries. They can offer guidance on selecting bushings that meet the required standards and provide the necessary performance characteristics for your application. Search for suppliers that have experience serving the food processing and pharmaceutical sectors.
  • Material Certifications: Certain certifications and approvals can indicate the suitability of plastic bushings for use in food processing or pharmaceutical machinery. Check if the bushing materials comply with regulations such as FDA 21 CFR, EU Regulation (EC) No. 1935/2004, or NSF/ANSI Standard 51. Material datasheets or manufacturer documentation should provide information about the certifications and approvals obtained for the bushing materials.
  • Consulting with Experts: If you require more specialized or specific recommendations, consider consulting with experts in the field of food processing or pharmaceutical engineering. These experts can provide insights based on their experience and knowledge of industry-specific requirements. Engage with consultants, engineers, or professionals who have expertise in the selection of components for food processing or pharmaceutical machinery.

When evaluating plastic bushings for food processing or pharmaceutical machinery, it is essential to consider the specific operating conditions, such as temperature, moisture, and cleaning processes, as well as the mechanical loads and movements involved. Additionally, ensure that the selected bushings are compatible with the mating surfaces and other components in the machinery.

By utilizing these resources and considering the factors mentioned above, you can obtain recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery, ensuring compliance with industry standards and maintaining the integrity of your processes.

plastic bush

Can I find information on the compatibility of plastic bushings with different shaft materials?

Yes, you can find information on the compatibility of plastic bushings with different shaft materials. It is important to consider the compatibility between the bushing material and the shaft material to ensure proper functioning, minimize wear, and prevent damage. Here are some sources where you can find information on the compatibility of plastic bushings with different shaft materials:

  • Manufacturer Documentation: Manufacturers of plastic bushings often provide information about the compatibility of their bushings with various shaft materials. This information may be available in their technical documentation, catalogs, or product datasheets. Look for details on recommended shaft materials, material pairings to avoid, and any specific considerations or limitations regarding compatibility.
  • Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to tribology, materials science, or mechanical design can offer valuable insights into the compatibility of plastic bushings with different shaft materials. These resources may provide compatibility charts, tables, or guidelines based on material properties, surface finishes, lubrication requirements, and other relevant factors. Consult reputable handbooks or reference guides that cover the specific materials involved in your application.
  • Online Databases and Technical Resources: There are online databases and technical resources dedicated to providing material compatibility information. These resources often include information on the compatibility of various materials, including plastic bushings and shaft materials. Examples include the MatWeb material database or material compatibility databases provided by material science organizations. Search for reliable online resources that have information on the compatibility of plastic bushings with different shaft materials.
  • Consulting with Material Experts: If you require more specialized or specific information regarding the compatibility of plastic bushings with particular shaft materials, consider consulting with material experts or engineers who have expertise in the field of tribology or material science. These experts can provide guidance based on their knowledge and experience and help you determine the compatibility considerations for your specific application.
  • Application Experience and Case Studies: Sometimes, information on the compatibility of plastic bushings with different shaft materials can be found through application experience and case studies. Industry forums, technical publications, or case study reports may provide insights into successful material pairings and real-world examples of compatibility. Engage with industry professionals, participate in relevant forums or communities, and explore technical literature to learn from others’ experiences and gain valuable information on material compatibility.

When assessing the compatibility between plastic bushings and shaft materials, factors such as material hardness, surface finish, lubrication, operating conditions, and expected loads should be taken into account. It is important to choose a plastic bushing material that is compatible with the specific shaft material to ensure proper functioning, minimize wear, and achieve the desired performance and lifespan of the bushing.

By utilizing the available resources and expertise, you can find information on the compatibility of plastic bushings with different shaft materials, enabling you to make informed decisions and select the appropriate bushing and shaft combination for your application.

plastic bush

Are there video tutorials on the proper installation and maintenance of plastic bushings in various machinery?

Yes, there are video tutorials available that provide guidance on the proper installation and maintenance of plastic bushings in various machinery. These video tutorials can be valuable resources for understanding the correct procedures and best practices to ensure optimal performance and longevity of the bushings. Here are some ways to access video tutorials on the installation and maintenance of plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide video tutorials on their official websites. These videos are often created by the manufacturers themselves and offer detailed instructions specific to their products. Visit the websites of reputable plastic bushing manufacturers and look for their resources section or video library to find relevant installation and maintenance tutorials.
  • Online Video Platforms: Video-sharing platforms such as YouTube, Vimeo, and Dailymotion host a vast amount of instructional content, including tutorials on the installation and maintenance of various components, including plastic bushings. You can use the search function on these platforms and enter relevant keywords such as “plastic bushing installation” or “plastic bushing maintenance” to find videos created by experts or enthusiasts in the field.
  • Industrial Associations and Organizations: Industry-specific associations and organizations often provide educational resources for professionals in the field. Visit the websites of these associations or organizations related to the machinery or industrial sector you are interested in and look for any available video tutorials or instructional materials on plastic bushing installation and maintenance.
  • Online Forums and Communities: Participating in online forums and communities dedicated to machinery, engineering, or related topics can be a valuable source of information. Members of these communities often share their experiences, tips, and video tutorials on various aspects of machinery maintenance, including the installation and maintenance of plastic bushings. Engage in discussions, ask questions, and seek recommendations for video tutorials from experienced members.
  • Training Courses and Webinars: Some organizations offer online training courses or webinars on machinery maintenance and component installation, which may include specific modules on plastic bushings. These courses often provide comprehensive guidance and may include video demonstrations or tutorials as part of the learning materials. Look for training providers or educational platforms that offer courses related to machinery maintenance and inquire if they cover topics related to plastic bushing installation and maintenance.

When accessing video tutorials on the installation and maintenance of plastic bushings, it’s essential to prioritize reliable and reputable sources. Check the credentials of the video creators, read user reviews or comments, and ensure that the information provided aligns with industry best practices. Additionally, always refer to the manufacturer’s guidelines and recommendations specific to the plastic bushings you are working with, as different products may have unique installation and maintenance requirements.

By utilizing video tutorials and instructional materials, you can gain valuable insights into the proper installation and maintenance procedures for plastic bushings in various machinery, helping you ensure the correct handling and care of these components.

China Hot selling PA6 Nylon Black or White Processing Parts Plastic Shaft Sleeve/Flange/Washer Injection Mold Bushing Custom PP/PTFE/POM Material.   bronze bushing	China Hot selling PA6 Nylon Black or White Processing Parts Plastic Shaft Sleeve/Flange/Washer Injection Mold Bushing Custom PP/PTFE/POM Material.   bronze bushing
editor by CX 2024-04-09

China high quality Custom Made Injection Molding Accessories Flanged PTFE Bushing / POM Plastic Bushing brass bushing

Product Description

Products Type

We can custom shape,size,color material and quantity for plastic bushing as your requirment.

Products Specification
1. Various hardness for your choice.
2. Good abrasion, heat and oil resistance.
3. Good anti-aging performance and gas tightness.
4. Ease of bonding to other material.
5. Excellent oxygen and CHINAMFG resistance.
6. Non-flammable,self-extinguish.  

Material PA,PA6,PA66,PP,PE,LDPE,HDPE,UWHDPE,PTFE,POM,ABS,or Custom Compound
(Any custom compound plastic is available)
Size According to samples or drawings
Color Black,white,red,green,transparent or any color according to Pantone colors
Finish High Gloss,Fine Grain,Electroplating,Painting,Printing,Texture etc,or as request
Type Round,square,rectangular,or any nonstandard shape as request
Logo Debossed,embossed,printed logo or as request

Plastic Material Properties

Our Factory

Company Profile

 
Zhongde (ZheJiang ) Machinery Equipment Co.,LTD is a company integrated in design,OEM&ODM plastic&rubber&CNCparts production.We can provide the best products and service at a competitive price.

Main Products

We can provide OEM service,which means producing base on your drawings or samples,also we can design according to its application or customer`s requirments.

Order Operation Flow

We execute each step according to the operation process flow, strictly, seriously and meet the requirements of customers with good quality on time.

For Fast Quotation,Please Inform Below Details
1. Production type
2. Material specification (or let us know the using environmental)
3. Size details? (or provide drawings or samples for refference)
4. Quantity request
5. Prefer color /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Connection: Flange
Type: Flanged
Specifications: Customized
Samples:
US$ 999/Piece
1 Piece(Min.Order)

|

Order Sample

For sample price, package information, and logisti
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

Are there specific guidelines for recycling or disposing of plastic bushings at the end of their life cycle?

When it comes to recycling or disposing of plastic bushings at the end of their life cycle, it is important to follow specific guidelines to promote environmental sustainability. Here’s a detailed explanation:

1. Recycling:

– Check with local recycling facilities or waste management organizations to determine if plastic bushings are accepted for recycling in your area. Recycling options may vary depending on the type of plastic material used in the bushings.

– If recycling is available, separate the plastic bushings from other components or materials before recycling. Remove any metal or non-recyclable parts attached to the bushings, if applicable.

– Clean the plastic bushings to remove any contaminants or residues that could affect the recycling process. Follow any specific cleaning instructions provided by the recycling facility or refer to general plastic cleaning guidelines.

– Consider contacting the manufacturer or supplier of the plastic bushings for guidance on recycling options. They may have information on specific recycling programs or initiatives available for their products.

2. Disposal:

– If recycling is not available or feasible, dispose of plastic bushings according to local waste management regulations. Check with local authorities or waste disposal facilities for guidelines on disposing of plastic components.

– In many cases, plastic bushings can be disposed of as regular non-recyclable waste. However, it’s essential to follow any specific instructions provided by local regulations or waste management authorities.

– If the plastic bushings contain any hazardous or toxic substances, such as heavy metals or chemicals, follow proper disposal procedures to prevent environmental contamination. Contact local hazardous waste facilities for guidance on disposing of such materials safely.

3. Manufacturer or Supplier Guidance:

– Reach out to the manufacturer or supplier of the plastic bushings for guidance on proper recycling or disposal methods. They may have specific recommendations or resources available to support environmentally responsible end-of-life management of their products.

– Manufacturers or suppliers who prioritize sustainability may have implemented take-back programs or recycling initiatives for their plastic bushings. Inquire about any available programs and follow their instructions for returning or recycling the bushings.

4. Consider Reuse or Repurposing:

– Before recycling or disposing of plastic bushings, consider whether they can be reused or repurposed in any way. For example, they might serve as components in DIY projects, crafts, or non-critical applications.

– If the plastic bushings are still in good condition and meet the requirements of another application, consider donating or selling them to individuals or organizations that can make use of them.

– Reusing or repurposing plastic bushings can help extend their lifespan and reduce the overall waste generated.

By following specific recycling or disposal guidelines, you can ensure that plastic bushings are managed in an environmentally responsible manner at the end of their life cycle. Recycling, proper disposal, seeking manufacturer guidance, and considering reuse or repurposing are important steps to promote sustainability and reduce the environmental impact of plastic waste.

plastic bush

Where can I purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment?

If you are looking to purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment, there are several options available to you. Here are some places where you can find and purchase plastic bushings tailored for these industries:

  • Industrial Suppliers and Distributors: Industrial suppliers and distributors specializing in components for specific industries often carry plastic bushings designed for automotive or medical applications. These suppliers have a wide range of products and can provide guidance on selecting the right bushings for your specific requirements. Search for reputable industrial suppliers or distributors that cater to the automotive or medical sectors, and inquire about their available plastic bushing options.
  • Online Marketplaces and E-commerce Platforms: Online marketplaces and e-commerce platforms offer a convenient way to search for and purchase plastic bushings designed for specific industry applications. Platforms like Amazon, Alibaba, or ThomasNet have extensive catalogs of industrial components, including plastic bushings. Use relevant keywords such as “automotive plastic bushings” or “medical equipment bushings” to narrow down your search and explore the available options from different sellers.
  • Manufacturer Websites: Visit the websites of reputable manufacturers that specialize in producing plastic bushings for specific industries. Many manufacturers provide detailed product information, specifications, and application guides on their websites. Identify manufacturers known for their expertise in automotive or medical applications, and explore their product offerings. Manufacturer websites often have contact information or online inquiry forms that allow you to directly reach out for purchasing inquiries.
  • Trade Shows and Industry Events: Attend trade shows, exhibitions, or industry events related to the automotive or medical sectors. These events often feature a wide range of suppliers and manufacturers showcasing their products and innovations. It’s an excellent opportunity to connect with industry experts, explore the latest advancements in plastic bushings, and establish contacts with suppliers who specialize in serving specific industry applications.
  • Local Distributors and Retailers: Check if there are local distributors or retailers in your area that specialize in supplying components to the automotive or medical industries. These distributors often have physical stores or warehouses where you can personally visit, browse their product offerings, and make purchases. Local distributors may also provide personalized support and expertise to help you find the right plastic bushings for your application.

When purchasing plastic bushings designed for specific industry applications, it’s important to consider factors such as material compatibility, performance requirements, and industry-specific certifications or standards. Ensure that the chosen plastic bushings meet the necessary specifications and regulations for the intended application.

By exploring these purchasing options and consulting with industry experts, you can find and purchase plastic bushings that are specifically designed for automotive or medical equipment, ensuring optimal performance and compatibility with the requirements of these industries.

plastic bush

What are the key considerations when selecting plastic bushings for corrosive environments?

When selecting plastic bushings for corrosive environments, it’s essential to consider several key factors to ensure the longevity and performance of the bushings. Corrosive environments can pose significant challenges to materials, including degradation, chemical attack, and loss of mechanical properties. Here are the key considerations when selecting plastic bushings for corrosive environments:

  • Chemical Compatibility: The first and foremost consideration is the chemical compatibility of the plastic material with the corrosive substances present in the environment. Different plastics have varying degrees of resistance to specific chemicals. It’s crucial to identify the types of corrosive chemicals, acids, bases, solvents, or other substances that the bushings will be exposed to and choose a plastic material that offers excellent resistance to those specific chemicals.
  • Material Selection: Certain plastic materials are known for their superior chemical resistance properties. For corrosive environments, consider using plastic materials such as PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene Fluoride), PPS (Polyphenylene Sulfide), or ETFE (Ethylene Tetrafluoroethylene). These materials offer excellent resistance to a wide range of corrosive chemicals and can withstand harsh environments.
  • Temperature Range: In addition to chemical compatibility, consider the temperature range of the corrosive environment. Some plastics may have temperature limitations and can degrade or lose their chemical resistance properties at elevated temperatures. Ensure that the selected plastic material can withstand the temperature range of the corrosive environment without compromising its performance or chemical resistance.
  • Load and Wear Requirements: Evaluate the load and wear requirements of the application. Corrosive environments may involve abrasive particles or high loads that can accelerate wear and reduce the lifespan of the bushings. Select plastic materials that offer excellent wear resistance and can withstand the specific load conditions of the application.
  • Sealing and Contamination: Corrosive environments often involve the presence of moisture, gases, or contaminants. Consider whether the bushings need to provide sealing properties to prevent ingress of corrosive substances or contamination. Some plastic bushings can be designed with additional sealing features to enhance protection against corrosive elements.
  • UV and Weather Resistance: If the corrosive environment involves exposure to sunlight or outdoor weather conditions, consider the UV resistance and weatherability of the plastic material. Some plastics may degrade or experience color fading when exposed to prolonged sunlight or extreme weather conditions. Choose a plastic material that offers good UV resistance and weather resistance properties if applicable.
  • Manufacturer Expertise: Work closely with manufacturers or suppliers who have expertise in providing plastic bushings for corrosive environments. They can offer guidance on material selection, design considerations, and provide specific recommendations based on their experience and knowledge of different plastic materials and their performance in corrosive environments.

It’s important to thoroughly assess the corrosive environment and consult with experts to ensure the right plastic material is selected for the bushings. Conduct compatibility tests, review material datasheets, and consider real-world application experiences to make an informed decision. Additionally, proper installation, regular inspection, and maintenance practices should be followed to maximize the performance and lifespan of the plastic bushings in corrosive environments.

By considering these key factors, you can select plastic bushings that are well-suited for corrosive environments, providing reliable and long-lasting performance even in the presence of corrosive substances.

China high quality Custom Made Injection Molding Accessories Flanged PTFE Bushing / POM Plastic Bushing   brass bushing			China high quality Custom Made Injection Molding Accessories Flanged PTFE Bushing / POM Plastic Bushing   brass bushing
editor by CX 2024-04-03

China Custom Hot Sale Custom Plastic Bushing with Collar Nylon Rubber POM PTFE Flange Bushings bushing block

Product Description

Hot Sale Custom Plastic Bushing with Collar Nylon Rubber POM PTFE Flange Bushings
 

PRODUCT DESCRIPTION

 

Product name

Hot Sale Custom Plastic Bushing with Collar Nylon Rubber POM PTFE Flange Bushings

Material

Nylon or Customized

Finish

Clean or Customized

Process

Precision CNC Machining, Lathing

Tolerance

±0.05mm, or customized 

Package

PP bag , Carton ,box, or required

Usage

Insulator Bushing

MOQ

500 pcs

Sample

Available

Shipping

Shipped by express, by sea, by air

Mainly Line

Precision CNC Machining,Precision Stamping Parts,Plastic Injection Molding,hardware,

Lead Time

Sample: 7-10 days 

Batch goods: 10-25 days

 

 DETAILED IMAGES

 

COMPANY PROFILE

 

 

EXHIBITION SHOW

 

PACKING AND DELIVERY

1. Inner Packing

For small products: 100PCS-200PCS per sealed plastic bag.
For bigger products: 2PCS-10PCS per plastic film roller (depends on the product size)

2. Outer Packing&Shipment Packing
8PCS-300PCS per carton (depends on the product size)
 

3.  Shipment Packing

18-24 cartons per wood case or pallet, shockproof and safe for transportation.

 

FAQ

Q: Are you trading company or manufacturer?
A: Our management is focused on exporting activities for more than 10 years and we have our own bushing factory. CHINAMFG is always professional and reliable. Our advantages are multiple resource integration, strong quality assurance and excellent service level. We are always responsible for our products.

Q: Hong long is your delivery time?
A: Generally 10-25 days after order. It depends on the quantity.

Q: Do you produce samples? Is it free or extra?
A: For standard products, we produce samples free of charge for our customers. And the express costs will be burdened by the customer, but can be returned after the order is placed.

Q: How to ensure the quality?
A: We produce as per the confirmed technology or drawings for each order for our customers. And our factory has a strict quality control system. We inspect goods during production according to a certain frequency and we also perform the final inspection before the goods are packed.

Q: Do you like to serve the customers only with small orders?
A: We are always glad to grow up together with all our customers whatever big or small.We hope our customers become stronger and stronger to be with us.
 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Customized: Customized
Certification: ISO, ISO 9001:2015
Standard Parts: No
Universal: Yes
Type: Bushing
Material: Nylon
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

plastic bush

Are there specific guidelines for recycling or disposing of plastic bushings at the end of their life cycle?

When it comes to recycling or disposing of plastic bushings at the end of their life cycle, it is important to follow specific guidelines to promote environmental sustainability. Here’s a detailed explanation:

1. Recycling:

– Check with local recycling facilities or waste management organizations to determine if plastic bushings are accepted for recycling in your area. Recycling options may vary depending on the type of plastic material used in the bushings.

– If recycling is available, separate the plastic bushings from other components or materials before recycling. Remove any metal or non-recyclable parts attached to the bushings, if applicable.

– Clean the plastic bushings to remove any contaminants or residues that could affect the recycling process. Follow any specific cleaning instructions provided by the recycling facility or refer to general plastic cleaning guidelines.

– Consider contacting the manufacturer or supplier of the plastic bushings for guidance on recycling options. They may have information on specific recycling programs or initiatives available for their products.

2. Disposal:

– If recycling is not available or feasible, dispose of plastic bushings according to local waste management regulations. Check with local authorities or waste disposal facilities for guidelines on disposing of plastic components.

– In many cases, plastic bushings can be disposed of as regular non-recyclable waste. However, it’s essential to follow any specific instructions provided by local regulations or waste management authorities.

– If the plastic bushings contain any hazardous or toxic substances, such as heavy metals or chemicals, follow proper disposal procedures to prevent environmental contamination. Contact local hazardous waste facilities for guidance on disposing of such materials safely.

3. Manufacturer or Supplier Guidance:

– Reach out to the manufacturer or supplier of the plastic bushings for guidance on proper recycling or disposal methods. They may have specific recommendations or resources available to support environmentally responsible end-of-life management of their products.

– Manufacturers or suppliers who prioritize sustainability may have implemented take-back programs or recycling initiatives for their plastic bushings. Inquire about any available programs and follow their instructions for returning or recycling the bushings.

4. Consider Reuse or Repurposing:

– Before recycling or disposing of plastic bushings, consider whether they can be reused or repurposed in any way. For example, they might serve as components in DIY projects, crafts, or non-critical applications.

– If the plastic bushings are still in good condition and meet the requirements of another application, consider donating or selling them to individuals or organizations that can make use of them.

– Reusing or repurposing plastic bushings can help extend their lifespan and reduce the overall waste generated.

By following specific recycling or disposal guidelines, you can ensure that plastic bushings are managed in an environmentally responsible manner at the end of their life cycle. Recycling, proper disposal, seeking manufacturer guidance, and considering reuse or repurposing are important steps to promote sustainability and reduce the environmental impact of plastic waste.

plastic bush

Are there tutorials on troubleshooting common issues with plastic bushings and their solutions?

Yes, there are tutorials available that provide guidance on troubleshooting common issues with plastic bushings and offer solutions to resolve them. Troubleshooting tutorials can be helpful in identifying and addressing problems that may arise during the use of plastic bushings. Here are some places where you can find tutorials on troubleshooting common issues with plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide tutorials, guides, or technical resources on their websites. These resources often include troubleshooting sections that address common issues encountered with their products. Visit the websites of manufacturers that produce the specific type or brand of plastic bushings you are using. Look for documentation, FAQs, or technical articles that cover troubleshooting topics. Manufacturers are typically knowledgeable about their products and can offer valuable insights into resolving common issues.
  • Online Forums and Communities: Online forums and communities focused on engineering, mechanical design, or specific industries can be excellent sources of information for troubleshooting plastic bushing issues. Participate in these forums and engage with professionals who have experience in working with plastic bushings. Ask questions, describe the issues you are facing, and seek advice from the community. Often, you will find individuals who have encountered similar problems and can share their solutions and experiences.
  • Technical Publications and Journals: Technical publications, journals, and magazines related to mechanical engineering, tribology, or maintenance often contain articles that discuss troubleshooting techniques for various mechanical components, including plastic bushings. These publications may provide case studies, analysis, and practical solutions for common problems. Explore relevant publications and search their archives for articles on plastic bushing troubleshooting. Academic databases and online libraries can be valuable resources for accessing technical publications.
  • YouTube and Online Video Platforms: Video tutorials on platforms like YouTube can be a visual and interactive way to learn about troubleshooting plastic bushing issues. Many content creators and industry experts share their knowledge and demonstrate techniques for diagnosing and resolving common problems. Search for keywords related to plastic bushing troubleshooting on these platforms to find relevant videos. Watching demonstrations can often provide a clearer understanding of the troubleshooting process and the steps involved in resolving issues.
  • Training Courses and Workshops: Some organizations or training providers offer courses or workshops focused on mechanical maintenance, machinery troubleshooting, or specific industrial applications. These training programs may cover topics related to plastic bushings and provide hands-on experience in identifying and resolving common issues. Check with local trade schools, technical institutes, or professional training organizations to see if they offer courses that include plastic bushing troubleshooting as part of their curriculum.

When using troubleshooting tutorials, it is important to carefully understand the symptoms and causes of the issues you are encountering. Ensure that the suggested solutions align with your specific situation and take into account the operating conditions and application requirements of your plastic bushings.

By accessing tutorials from these various sources and applying the recommended troubleshooting techniques, you can gain valuable insights into identifying and resolving common issues with plastic bushings, improving their performance, and prolonging their lifespan.

plastic bush

What are the key considerations when selecting plastic bushings for corrosive environments?

When selecting plastic bushings for corrosive environments, it’s essential to consider several key factors to ensure the longevity and performance of the bushings. Corrosive environments can pose significant challenges to materials, including degradation, chemical attack, and loss of mechanical properties. Here are the key considerations when selecting plastic bushings for corrosive environments:

  • Chemical Compatibility: The first and foremost consideration is the chemical compatibility of the plastic material with the corrosive substances present in the environment. Different plastics have varying degrees of resistance to specific chemicals. It’s crucial to identify the types of corrosive chemicals, acids, bases, solvents, or other substances that the bushings will be exposed to and choose a plastic material that offers excellent resistance to those specific chemicals.
  • Material Selection: Certain plastic materials are known for their superior chemical resistance properties. For corrosive environments, consider using plastic materials such as PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene Fluoride), PPS (Polyphenylene Sulfide), or ETFE (Ethylene Tetrafluoroethylene). These materials offer excellent resistance to a wide range of corrosive chemicals and can withstand harsh environments.
  • Temperature Range: In addition to chemical compatibility, consider the temperature range of the corrosive environment. Some plastics may have temperature limitations and can degrade or lose their chemical resistance properties at elevated temperatures. Ensure that the selected plastic material can withstand the temperature range of the corrosive environment without compromising its performance or chemical resistance.
  • Load and Wear Requirements: Evaluate the load and wear requirements of the application. Corrosive environments may involve abrasive particles or high loads that can accelerate wear and reduce the lifespan of the bushings. Select plastic materials that offer excellent wear resistance and can withstand the specific load conditions of the application.
  • Sealing and Contamination: Corrosive environments often involve the presence of moisture, gases, or contaminants. Consider whether the bushings need to provide sealing properties to prevent ingress of corrosive substances or contamination. Some plastic bushings can be designed with additional sealing features to enhance protection against corrosive elements.
  • UV and Weather Resistance: If the corrosive environment involves exposure to sunlight or outdoor weather conditions, consider the UV resistance and weatherability of the plastic material. Some plastics may degrade or experience color fading when exposed to prolonged sunlight or extreme weather conditions. Choose a plastic material that offers good UV resistance and weather resistance properties if applicable.
  • Manufacturer Expertise: Work closely with manufacturers or suppliers who have expertise in providing plastic bushings for corrosive environments. They can offer guidance on material selection, design considerations, and provide specific recommendations based on their experience and knowledge of different plastic materials and their performance in corrosive environments.

It’s important to thoroughly assess the corrosive environment and consult with experts to ensure the right plastic material is selected for the bushings. Conduct compatibility tests, review material datasheets, and consider real-world application experiences to make an informed decision. Additionally, proper installation, regular inspection, and maintenance practices should be followed to maximize the performance and lifespan of the plastic bushings in corrosive environments.

By considering these key factors, you can select plastic bushings that are well-suited for corrosive environments, providing reliable and long-lasting performance even in the presence of corrosive substances.

China Custom Hot Sale Custom Plastic Bushing with Collar Nylon Rubber POM PTFE Flange Bushings   bushing block		China Custom Hot Sale Custom Plastic Bushing with Collar Nylon Rubber POM PTFE Flange Bushings   bushing block
editor by CX 2024-03-04

China Custom Plastic Conduit Bushing with Npsm Thread bushing design

Product Description

Plastic Conduit Bushing with NPSM Thread
1) Material:Plastic
2) Size:1/2″to4″
3) Application:for use with locknut to terminate Rigid or IMC conduit to a box or enclosure

Our Services
Two years quality guarantee.

Company Information
EVT Electrical is a UL listed, CE attested and ISO 9001:2015 certified factory, engaged in manufacturing of electrical conduit fittings. Our products include EMT tubings, IMC conduits, IMC elbows, RMC conduits, IMC/Rigid couplings, BS31 conduits, BS4568 conduits, lock nuts, conduit bushings, liquid-tight connectors, and metal boxes. We also provide OEM service.

FAQ
Q: How can I request a product sample?
A: The samples are free but freight should be collected. Please send sample list and courier account number by email.
 
Q: How can I request a product catalog?
A: The hard copies of catalogs are free but freight should be collected. Please send courier account number by email. You are suggested to request a PDF catalog.
 
Q: Wha’s your payment terms?
A: One is T/T 30% before production and 70% against copy of B/L; the other is Irrevocable L/C 100% at sight.
 
Q: What’s your trade terms?
A: FOB, CNF(CFR), CIF, EXW.
 
Q: How long is the quality guarantee?
A: All of our products have a period of quality guarantee since time of shipment. Please contact your salesman for more details, as different products enjoy different time of guarantee. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24 Months Quality Guarantee Since Shipment
Connection: Female
Type: Bushing
Specifications: UL
Material: Plastic
Customized: Non-Customized
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

plastic bush

Where can I find online communities or forums discussing experiences with plastic bushings in specific applications?

Online communities and forums dedicated to discussing experiences with plastic bushings in specific applications can provide valuable insights and knowledge-sharing opportunities. Here are some places where you can find such communities:

  • Engineering and Mechanical Forums: Online forums and communities focused on engineering, mechanical design, or specific industries often have dedicated sections or threads where professionals discuss various components, including plastic bushings. Platforms like Reddit, Stack Exchange, or specialized engineering forums allow users to post questions, share experiences, and seek advice from others in the field. Explore relevant subreddits or forums and search for topics related to plastic bushings or specific applications to find discussions and experiences shared by community members.
  • Industry-Specific Forums: Depending on the specific application or industry you are interested in, there may be industry-specific forums or communities where professionals gather to discuss challenges, solutions, and experiences related to equipment components. These forums can be industry-specific platforms, professional association websites, or dedicated online communities. For example, if you are looking for discussions on plastic bushings used in automotive applications, you might find relevant forums on automotive engineering websites or automotive enthusiast communities.
  • LinkedIn Groups: LinkedIn, a professional networking platform, hosts numerous industry-specific groups where professionals share insights, ask questions, and discuss various topics. Search for groups related to your specific application or industry that focus on mechanical engineering, equipment design, or maintenance. Join these groups and actively participate in discussions related to plastic bushings. Engaging with professionals in your field of interest can provide valuable perspectives and experiences.
  • Online Machinery and Equipment Communities: Online communities or platforms dedicated to machinery and equipment enthusiasts or professionals can also be a source of information on plastic bushings. These communities may have dedicated sections or discussions related to components, maintenance, or troubleshooting. Explore machinery or equipment-focused websites, forums, or social media groups to find discussions or experiences shared by individuals who have worked with plastic bushings in specific applications.
  • Manufacturer Websites and Support Forums: Manufacturers of plastic bushings sometimes have their own websites with support forums or discussion boards where users can post questions, share experiences, and seek advice. These forums may be specific to the manufacturer’s product line or cover broader topics related to plastic bushings. Visit the websites of manufacturers that produce the plastic bushings you are interested in and look for community sections or support forums where you can engage with other users and professionals.

When participating in online communities or forums, it’s important to respect community guidelines, ask specific questions, and provide relevant information about your application to receive targeted responses. Engaging with experienced professionals and learning from their experiences can help you gain valuable insights into the use of plastic bushings in specific applications and make informed decisions for your own projects.

plastic bush

Are there tutorials on troubleshooting common issues with plastic bushings and their solutions?

Yes, there are tutorials available that provide guidance on troubleshooting common issues with plastic bushings and offer solutions to resolve them. Troubleshooting tutorials can be helpful in identifying and addressing problems that may arise during the use of plastic bushings. Here are some places where you can find tutorials on troubleshooting common issues with plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide tutorials, guides, or technical resources on their websites. These resources often include troubleshooting sections that address common issues encountered with their products. Visit the websites of manufacturers that produce the specific type or brand of plastic bushings you are using. Look for documentation, FAQs, or technical articles that cover troubleshooting topics. Manufacturers are typically knowledgeable about their products and can offer valuable insights into resolving common issues.
  • Online Forums and Communities: Online forums and communities focused on engineering, mechanical design, or specific industries can be excellent sources of information for troubleshooting plastic bushing issues. Participate in these forums and engage with professionals who have experience in working with plastic bushings. Ask questions, describe the issues you are facing, and seek advice from the community. Often, you will find individuals who have encountered similar problems and can share their solutions and experiences.
  • Technical Publications and Journals: Technical publications, journals, and magazines related to mechanical engineering, tribology, or maintenance often contain articles that discuss troubleshooting techniques for various mechanical components, including plastic bushings. These publications may provide case studies, analysis, and practical solutions for common problems. Explore relevant publications and search their archives for articles on plastic bushing troubleshooting. Academic databases and online libraries can be valuable resources for accessing technical publications.
  • YouTube and Online Video Platforms: Video tutorials on platforms like YouTube can be a visual and interactive way to learn about troubleshooting plastic bushing issues. Many content creators and industry experts share their knowledge and demonstrate techniques for diagnosing and resolving common problems. Search for keywords related to plastic bushing troubleshooting on these platforms to find relevant videos. Watching demonstrations can often provide a clearer understanding of the troubleshooting process and the steps involved in resolving issues.
  • Training Courses and Workshops: Some organizations or training providers offer courses or workshops focused on mechanical maintenance, machinery troubleshooting, or specific industrial applications. These training programs may cover topics related to plastic bushings and provide hands-on experience in identifying and resolving common issues. Check with local trade schools, technical institutes, or professional training organizations to see if they offer courses that include plastic bushing troubleshooting as part of their curriculum.

When using troubleshooting tutorials, it is important to carefully understand the symptoms and causes of the issues you are encountering. Ensure that the suggested solutions align with your specific situation and take into account the operating conditions and application requirements of your plastic bushings.

By accessing tutorials from these various sources and applying the recommended troubleshooting techniques, you can gain valuable insights into identifying and resolving common issues with plastic bushings, improving their performance, and prolonging their lifespan.

plastic bush

Are there video tutorials on the proper installation and maintenance of plastic bushings in various machinery?

Yes, there are video tutorials available that provide guidance on the proper installation and maintenance of plastic bushings in various machinery. These video tutorials can be valuable resources for understanding the correct procedures and best practices to ensure optimal performance and longevity of the bushings. Here are some ways to access video tutorials on the installation and maintenance of plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide video tutorials on their official websites. These videos are often created by the manufacturers themselves and offer detailed instructions specific to their products. Visit the websites of reputable plastic bushing manufacturers and look for their resources section or video library to find relevant installation and maintenance tutorials.
  • Online Video Platforms: Video-sharing platforms such as YouTube, Vimeo, and Dailymotion host a vast amount of instructional content, including tutorials on the installation and maintenance of various components, including plastic bushings. You can use the search function on these platforms and enter relevant keywords such as “plastic bushing installation” or “plastic bushing maintenance” to find videos created by experts or enthusiasts in the field.
  • Industrial Associations and Organizations: Industry-specific associations and organizations often provide educational resources for professionals in the field. Visit the websites of these associations or organizations related to the machinery or industrial sector you are interested in and look for any available video tutorials or instructional materials on plastic bushing installation and maintenance.
  • Online Forums and Communities: Participating in online forums and communities dedicated to machinery, engineering, or related topics can be a valuable source of information. Members of these communities often share their experiences, tips, and video tutorials on various aspects of machinery maintenance, including the installation and maintenance of plastic bushings. Engage in discussions, ask questions, and seek recommendations for video tutorials from experienced members.
  • Training Courses and Webinars: Some organizations offer online training courses or webinars on machinery maintenance and component installation, which may include specific modules on plastic bushings. These courses often provide comprehensive guidance and may include video demonstrations or tutorials as part of the learning materials. Look for training providers or educational platforms that offer courses related to machinery maintenance and inquire if they cover topics related to plastic bushing installation and maintenance.

When accessing video tutorials on the installation and maintenance of plastic bushings, it’s essential to prioritize reliable and reputable sources. Check the credentials of the video creators, read user reviews or comments, and ensure that the information provided aligns with industry best practices. Additionally, always refer to the manufacturer’s guidelines and recommendations specific to the plastic bushings you are working with, as different products may have unique installation and maintenance requirements.

By utilizing video tutorials and instructional materials, you can gain valuable insights into the proper installation and maintenance procedures for plastic bushings in various machinery, helping you ensure the correct handling and care of these components.

China Custom Plastic Conduit Bushing with Npsm Thread   bushing design		China Custom Plastic Conduit Bushing with Npsm Thread   bushing design
editor by CX 2024-02-29

China Hot selling Custom PA6 Nylon Sleeve or Flanged Shaft Washer Plastic Bushing Custom Material POM/PTFE/PP and Color of Excellent Performance. cable bushing

Product Description

Custom PA6 Nylon Sleeve or Flanged Shaft Washer Plastic Bushing Custom Material POM/PTFE/PP and Color of Excellent Performance 

 

Product Name:

Plastic bushing

Application :

Domestic electrical, automotive ,engineering machinery ,industry ,etc

Material:

Nylon PA6, Nylon, ABS, POM,PTFE

Color:

Black/white/yellow or others

Material Density:

1.25~1.64g/cm3

Max PV value :

0.27~1.40 N/mm²·m/s

Tensile Strengthen:

40~90MPa

Hardness:

72~90 HRR

Thermal conductivity:

0.24 W/(m·k)

Friction:

0.08~0.26

Working Temperature:

-80~+240ºC

In addition to the standard product catalog is displayed, we provide non-standard product or to order according to customer requirements.

 

Packing & Delivery

Packing Details:
 

1. Inner Packing
For small products: 100pcs-200pcs per sealed plastic bag. For bigger products: 2pcs-10pcs per plastic film roller (depends on the product size)

2. Outer Packing&Shipment Packing

8pcs-300pcs per carton (depends on the product size)
18-24 cartons per wood case or pallet, shockproof and safe for transportation.

Company Profile

 

 

 

 

Our Factory

 

 

FAQ

Q: Are you trading company or manufacturer?
A: Our management is focused on exporting activities for more than 10 years and we have our own bushing factory. CHINAMFG is always professional and reliable. Our advantages are multiple resource integration, strong quality assurance and excellent service level. We are always responsible for our products

Q: Hong long is your delivery time?
A: Generally 10-25 days after order. It depends on the quantity.

Q: Do you produce samples? Is it free or extra?
A: For standard products, we produce samples free of charge for our customers. And the express costs will be burdened by the customer, but can be returned after the order is placed.

Q: How to ensure the quality?
A: We produce as per the confirmed technology or drawings for each order for our customers. And our factory has a strict quality control system. We inspect goods during production according to a certain frequency and we also perform the final inspection before the goods are packed.

Q: Do you like to serve the customers only with small orders?
A: We are always glad to grow up together with all our customers whatever big or small.

We hope our customers become stronger and stronger to be with us.

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Customized: Customized
Certification: ISO, ISO 9001:2015
Standard Parts: Standard and Non Standard
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

Can I get recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery?

Yes, recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery can be obtained. When selecting plastic bushings for such applications, it is crucial to consider factors such as material compatibility, regulatory compliance, hygiene requirements, and resistance to chemicals and cleaning agents. Here are some options to help you find suitable plastic bushings:

  • Manufacturer Recommendations: Start by consulting manufacturers that specialize in producing plastic bushings for food processing or pharmaceutical applications. These manufacturers are knowledgeable about the specific requirements of these industries and can recommend bushing materials that comply with relevant regulations and standards. Contact their technical support teams or refer to their product documentation to obtain specific recommendations based on your application’s needs.
  • Industry Associations and Standards: Industry associations and regulatory bodies in the food processing and pharmaceutical sectors often provide guidelines and standards for equipment components, including bushings. Examples include organizations like the Food and Drug Administration (FDA) for food processing or the International Society for Pharmaceutical Engineering (ISPE) for pharmaceutical machinery. Refer to their guidelines or consult with industry experts to identify recommended materials and specifications for plastic bushings.
  • Specialty Suppliers: Look for specialty suppliers that focus on providing components for food processing or pharmaceutical machinery. These suppliers often have a range of plastic bushings specifically designed and certified for use in these industries. They can offer guidance on selecting bushings that meet the required standards and provide the necessary performance characteristics for your application. Search for suppliers that have experience serving the food processing and pharmaceutical sectors.
  • Material Certifications: Certain certifications and approvals can indicate the suitability of plastic bushings for use in food processing or pharmaceutical machinery. Check if the bushing materials comply with regulations such as FDA 21 CFR, EU Regulation (EC) No. 1935/2004, or NSF/ANSI Standard 51. Material datasheets or manufacturer documentation should provide information about the certifications and approvals obtained for the bushing materials.
  • Consulting with Experts: If you require more specialized or specific recommendations, consider consulting with experts in the field of food processing or pharmaceutical engineering. These experts can provide insights based on their experience and knowledge of industry-specific requirements. Engage with consultants, engineers, or professionals who have expertise in the selection of components for food processing or pharmaceutical machinery.

When evaluating plastic bushings for food processing or pharmaceutical machinery, it is essential to consider the specific operating conditions, such as temperature, moisture, and cleaning processes, as well as the mechanical loads and movements involved. Additionally, ensure that the selected bushings are compatible with the mating surfaces and other components in the machinery.

By utilizing these resources and considering the factors mentioned above, you can obtain recommendations for plastic bushings suitable for use in food processing or pharmaceutical machinery, ensuring compliance with industry standards and maintaining the integrity of your processes.

plastic bush

Can I find information on the compatibility of plastic bushings with different shaft materials?

Yes, you can find information on the compatibility of plastic bushings with different shaft materials. It is important to consider the compatibility between the bushing material and the shaft material to ensure proper functioning, minimize wear, and prevent damage. Here are some sources where you can find information on the compatibility of plastic bushings with different shaft materials:

  • Manufacturer Documentation: Manufacturers of plastic bushings often provide information about the compatibility of their bushings with various shaft materials. This information may be available in their technical documentation, catalogs, or product datasheets. Look for details on recommended shaft materials, material pairings to avoid, and any specific considerations or limitations regarding compatibility.
  • Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to tribology, materials science, or mechanical design can offer valuable insights into the compatibility of plastic bushings with different shaft materials. These resources may provide compatibility charts, tables, or guidelines based on material properties, surface finishes, lubrication requirements, and other relevant factors. Consult reputable handbooks or reference guides that cover the specific materials involved in your application.
  • Online Databases and Technical Resources: There are online databases and technical resources dedicated to providing material compatibility information. These resources often include information on the compatibility of various materials, including plastic bushings and shaft materials. Examples include the MatWeb material database or material compatibility databases provided by material science organizations. Search for reliable online resources that have information on the compatibility of plastic bushings with different shaft materials.
  • Consulting with Material Experts: If you require more specialized or specific information regarding the compatibility of plastic bushings with particular shaft materials, consider consulting with material experts or engineers who have expertise in the field of tribology or material science. These experts can provide guidance based on their knowledge and experience and help you determine the compatibility considerations for your specific application.
  • Application Experience and Case Studies: Sometimes, information on the compatibility of plastic bushings with different shaft materials can be found through application experience and case studies. Industry forums, technical publications, or case study reports may provide insights into successful material pairings and real-world examples of compatibility. Engage with industry professionals, participate in relevant forums or communities, and explore technical literature to learn from others’ experiences and gain valuable information on material compatibility.

When assessing the compatibility between plastic bushings and shaft materials, factors such as material hardness, surface finish, lubrication, operating conditions, and expected loads should be taken into account. It is important to choose a plastic bushing material that is compatible with the specific shaft material to ensure proper functioning, minimize wear, and achieve the desired performance and lifespan of the bushing.

By utilizing the available resources and expertise, you can find information on the compatibility of plastic bushings with different shaft materials, enabling you to make informed decisions and select the appropriate bushing and shaft combination for your application.

plastic bush

Can I get recommendations for plastic bushings suitable for high-temperature applications?

When it comes to high-temperature applications, selecting the right plastic bushings is crucial to ensure optimal performance and reliability. While many plastic materials have temperature limitations, there are specific types of plastic bushings that are designed to withstand elevated temperatures. Here are some recommendations for plastic bushings suitable for high-temperature applications:

  • PTFE (Polytetrafluoroethylene) Bushings: PTFE is a commonly used material for high-temperature applications due to its exceptional resistance to heat. PTFE bushings can operate in temperatures ranging from -200°C to +260°C (-328°F to +500°F) without significant loss of performance. They exhibit low friction, excellent chemical resistance, and maintain their dimensional stability at high temperatures.
  • PEEK (Polyether Ether Ketone) Bushings: PEEK is a high-performance thermoplastic that offers excellent mechanical properties and thermal stability. PEEK bushings can withstand temperatures up to +250°C (+482°F) continuously and have short-term temperature resistance up to +300°C (+572°F). They possess low friction, high wear resistance, and good chemical resistance, making them suitable for demanding high-temperature applications.
  • PI (Polyimide) Bushings: Polyimide, often referred to by the brand name Vespel, is a high-temperature polymer known for its excellent thermal stability and mechanical properties. PI bushings can operate in temperatures exceeding +300°C (+572°F) continuously. They offer low wear rates, high strength, and good dimensional stability, making them suitable for extreme high-temperature environments.
  • PEI (Polyetherimide) Bushings: PEI is a high-temperature engineering plastic with good mechanical properties and thermal resistance. PEI bushings can withstand temperatures up to +170°C (+338°F) continuously. They exhibit low creep, high dimensional stability, and good chemical resistance, making them suitable for applications where moderate high-temperature performance is required.
  • PPS (Polyphenylene Sulfide) Bushings: PPS is a high-performance thermoplastic that offers excellent heat resistance. PPS bushings can operate in temperatures up to +200°C (+392°F) continuously. They possess good dimensional stability, low moisture absorption, and high chemical resistance, making them suitable for high-temperature and chemically aggressive environments.

It’s important to note that the temperature ranges mentioned above are general guidelines and can vary depending on specific grades and formulations of the plastic materials. Additionally, the performance of plastic bushings in high-temperature applications can be influenced by factors such as load, speed, and the presence of external factors like chemicals or abrasive particles. Therefore, it’s advisable to consult with the manufacturer or supplier of the plastic bushings to ensure they are suitable for your specific high-temperature application.

When selecting plastic bushings for high-temperature applications, consider factors such as temperature resistance, load capacity, wear resistance, coefficient of friction, and compatibility with mating surfaces. Additionally, ensure that the installation and operating conditions are within the recommended guidelines provided by the manufacturer to maximize the performance and lifespan of the bushings.

By choosing plastic bushings specifically designed for high-temperature applications, you can ensure reliable and long-lasting performance in environments where elevated temperatures are a concern.

China Hot selling Custom PA6 Nylon Sleeve or Flanged Shaft Washer Plastic Bushing Custom Material POM/PTFE/PP and Color of Excellent Performance.   cable bushing	China Hot selling Custom PA6 Nylon Sleeve or Flanged Shaft Washer Plastic Bushing Custom Material POM/PTFE/PP and Color of Excellent Performance.   cable bushing
editor by CX 2024-02-22

China best Custom CNC Machining PTFE Bearing Sleeve / Bush Plastic Bushing with Flange with high quality

Product Description

Product Propeties

1. Low friction coefficient
2. Aging resistance
3. High insulation
4. Heat and low temperature resistance
5. Non stick
6. Non toxic
7. High lubrication

 

Product Description

 

item

value

Place of CHINAMFG

ZheJiang China 

Brand Name

Conceptfe

Model Number

Extruded

Material

PTFE

Diameter

4-200

Length

1000 or 2000mm

Processing Service

Plunger extrusion

Place of Origin:

HangZhou, ZheJiang .China

Material:

PTFE

Color:

white,colorful

Temperature:

-180 – + 260 ºC

Brand Name:

Conceptfe

Certification:

ISO9001, ISO14001

Filling:

graphite,carbon, bronze,glass fibre

Model Number:

ptfe rod

 

Material Introduction

PTFE molded sheet is manufactured by molding method with PTFE granular resin. In fluoroplastics, PTFE got the most consumption and was used widely. It’s an important material in variety of fluoroplastics. PTFE exhibits astonishing chemical resistance. This self-lubricating material provides a low friction coefficient, and is ideally suited for the manufacture of corrosion-resistant gaskets & seals.

 

Name: PTFE (polytetrafluoroethylene)
Colors include: White
Types: sheets, rod

Characteristics:

♦ Superior endurance in corrosion
♦ Non-flammable,limited oxygen index is under 90.
♦ Low friction coefficient
♦ Non-viscous, Self-lubricating
♦ Superior endurance in high & low temperature, can be used -200~260ºC
♦ High electrical insulation
♦ Atmospheric aging resistance
♦ Low permeability, good gas barrier property
♦ Good physiological compatibility and anti-thrombotic

CHINAMFG Heat Exchange Equipment Co., Ltd. is a national science and technology small and medium-sized enterprise/high-tech enterprise. It is a strategic cooperative unit with ZheJiang Provincial Marine Chemical Research Institute. Both sides jointly build a joint laboratory for bromine production equipment and energy saving technology; The company focuses on manufacturing and technical innovation of series products of strong corrosion resistant heat exchange (condensation) equipment, including silicon carbide heat exchanger/glass heat exchanger/carbonized composite tube heat exchanger/strong acid heater and supporting corrosion resistant pipe fittings.

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1year
Warranty: 1year
Material: PTFE
Kind: Thermoplastics Pipes
Water Absorption: 1.5%~3.5%
Contraction Percentage: <0.4%
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

plastic bush

Can I get advice on choosing plastic bushings for noise reduction in machinery or equipment?

If you are seeking advice on choosing plastic bushings for noise reduction in machinery or equipment, consider the following factors:

1. Material Selection:

– Look for plastic bushings made from materials specifically designed for noise reduction, such as acetal (POM), nylon, or polyurethane. These materials have inherent damping properties that can help reduce vibrations and noise.

– Consider the operating conditions of your machinery or equipment. Ensure that the chosen plastic bushings can withstand the temperature, humidity, and chemical exposure of the application environment.

2. Design and Fit:

– Choose bushings with a design that matches the specific requirements of your machinery or equipment. Consider factors such as the load-bearing capacity, clearance, and fit tolerance.

– Opt for bushings with a tight fit to minimize movement and vibration, which can contribute to noise generation. A snug fit can help dampen vibrations and reduce noise effectively.

3. Lubrication and Maintenance:

– Plastic bushings often require lubrication to minimize friction and noise. Consider whether the chosen bushings need periodic lubrication or if they are self-lubricating.

– Evaluate the maintenance requirements of the bushings. Some plastic bushings may require regular inspection and replacement if they wear out quickly, while others have a longer lifespan.

4. Compatibility and Performance:

– Ensure that the chosen plastic bushings are compatible with the machinery or equipment they will be used in. Consider factors such as shaft material, surface finish, and operating speed to ensure optimal performance.

– Look for bushings that have been specifically tested or certified for noise reduction applications. Manufacturers may provide information on noise reduction capabilities, such as decibel reduction or noise attenuation levels.

5. Expert Advice and Supplier Support:

– Consult with experts or suppliers specializing in plastic bushings for noise reduction applications. They can provide valuable guidance based on their knowledge and experience.

– Explain your specific requirements and provide details about the machinery or equipment to receive tailored recommendations and ensure the best possible noise reduction solution.

By considering material selection, design and fit, lubrication and maintenance, compatibility and performance, and seeking expert advice and supplier support, you can make an informed decision when choosing plastic bushings for noise reduction in machinery or equipment. Prioritize noise reduction properties while ensuring compatibility with the application and considering long-term performance and maintenance needs.

plastic bush

Can I find reviews comparing the durability and performance of different types of plastic bushings?

Yes, it is possible to find reviews comparing the durability and performance of different types of plastic bushings. Reviews can be valuable resources for gaining insights into the real-world experiences of users and professionals who have tested and evaluated various plastic bushings. Here are some ways to find reviews comparing the durability and performance of different types of plastic bushings:

  • Online Retailers and E-commerce Platforms: Online retailers and e-commerce platforms that sell plastic bushings often have customer review sections where users can share their experiences and opinions. Browse through the product listings of plastic bushings and look for reviews or ratings provided by customers. While individual reviews may not directly compare different types of bushings, they can still offer valuable insights into the durability and performance of specific products.
  • Industrial Forums and Discussion Boards: Participating in online forums and discussion boards dedicated to industrial machinery, engineering, or related topics can provide access to valuable user experiences and comparisons. Engage in discussions, ask questions, and inquire about the experiences of professionals who have tested different types of plastic bushings. These platforms often have knowledgeable members who can share their insights and provide comparisons based on their firsthand experiences.
  • Industry Publications and Magazines: Industry-specific publications and magazines may feature articles, case studies, or product reviews that compare the durability and performance of different types of plastic bushings. Check online or physical copies of these publications related to the machinery, engineering, or industrial sectors for any available reviews or comparisons. These sources often provide in-depth analysis and expert opinions on the performance of various plastic bushings.
  • Manufacturer and Supplier Websites: Manufacturers and suppliers of plastic bushings sometimes publish technical articles, white papers, or case studies that highlight the performance characteristics and durability of their products. Visit the websites of reputable manufacturers or suppliers and explore their resources sections or technical documentation. While these sources may focus more on promoting specific products, they can still provide valuable information and insights into the performance of different types of plastic bushings.
  • Research Papers and Technical Journals: Academic research papers and technical journals in the field of materials science, engineering, or tribology may contain studies or comparative analyses of different plastic bushing materials. Access online databases of research papers or visit university libraries to search for relevant publications. These sources often provide scientific data, test results, and detailed evaluations of the durability and performance of various plastic bushings.

When reviewing and comparing different types of plastic bushings, it’s important to consider multiple sources and perspectives. Keep in mind that the performance of plastic bushings can be influenced by various factors, including application-specific conditions, load requirements, temperature ranges, and chemical exposures. Assessing reviews and comparisons in the context of your specific application and requirements can help you make informed decisions.

By utilizing reviews and comparisons, you can gain valuable insights into the durability and performance of different types of plastic bushings, helping you select the most suitable option for your specific needs.

plastic bush

Can I get recommendations for plastic bushings suitable for high-temperature applications?

When it comes to high-temperature applications, selecting the right plastic bushings is crucial to ensure optimal performance and reliability. While many plastic materials have temperature limitations, there are specific types of plastic bushings that are designed to withstand elevated temperatures. Here are some recommendations for plastic bushings suitable for high-temperature applications:

  • PTFE (Polytetrafluoroethylene) Bushings: PTFE is a commonly used material for high-temperature applications due to its exceptional resistance to heat. PTFE bushings can operate in temperatures ranging from -200°C to +260°C (-328°F to +500°F) without significant loss of performance. They exhibit low friction, excellent chemical resistance, and maintain their dimensional stability at high temperatures.
  • PEEK (Polyether Ether Ketone) Bushings: PEEK is a high-performance thermoplastic that offers excellent mechanical properties and thermal stability. PEEK bushings can withstand temperatures up to +250°C (+482°F) continuously and have short-term temperature resistance up to +300°C (+572°F). They possess low friction, high wear resistance, and good chemical resistance, making them suitable for demanding high-temperature applications.
  • PI (Polyimide) Bushings: Polyimide, often referred to by the brand name Vespel, is a high-temperature polymer known for its excellent thermal stability and mechanical properties. PI bushings can operate in temperatures exceeding +300°C (+572°F) continuously. They offer low wear rates, high strength, and good dimensional stability, making them suitable for extreme high-temperature environments.
  • PEI (Polyetherimide) Bushings: PEI is a high-temperature engineering plastic with good mechanical properties and thermal resistance. PEI bushings can withstand temperatures up to +170°C (+338°F) continuously. They exhibit low creep, high dimensional stability, and good chemical resistance, making them suitable for applications where moderate high-temperature performance is required.
  • PPS (Polyphenylene Sulfide) Bushings: PPS is a high-performance thermoplastic that offers excellent heat resistance. PPS bushings can operate in temperatures up to +200°C (+392°F) continuously. They possess good dimensional stability, low moisture absorption, and high chemical resistance, making them suitable for high-temperature and chemically aggressive environments.

It’s important to note that the temperature ranges mentioned above are general guidelines and can vary depending on specific grades and formulations of the plastic materials. Additionally, the performance of plastic bushings in high-temperature applications can be influenced by factors such as load, speed, and the presence of external factors like chemicals or abrasive particles. Therefore, it’s advisable to consult with the manufacturer or supplier of the plastic bushings to ensure they are suitable for your specific high-temperature application.

When selecting plastic bushings for high-temperature applications, consider factors such as temperature resistance, load capacity, wear resistance, coefficient of friction, and compatibility with mating surfaces. Additionally, ensure that the installation and operating conditions are within the recommended guidelines provided by the manufacturer to maximize the performance and lifespan of the bushings.

By choosing plastic bushings specifically designed for high-temperature applications, you can ensure reliable and long-lasting performance in environments where elevated temperatures are a concern.

China best Custom CNC Machining PTFE Bearing Sleeve / Bush Plastic Bushing with Flange   with high quality China best Custom CNC Machining PTFE Bearing Sleeve / Bush Plastic Bushing with Flange   with high quality
editor by CX 2024-02-21

China supplier Cheap Price Custom OEM Plastic Bushing Factory Sleeve Flange Flat Nylon PTFE POM Polyurethane Bushing For Machinery Spare Parts define bushing

Product Description

Cheap Price Custom OEM Plastic Bushing Factory Sleeve Flange Flat Nylon PTFE POM Polyurethane Bushing For Machinery Spare Parts

 

PRODUCT DESCRIPTION

 

Material  Nylon 
Inspection Equipments 3D Measure Instrument, CMM,  Spectrum Analyzers,  Electronic balance,  Microscope, Altimeter ,  Calipers,  Micrometer,etc.
  Application field Parts are used on vehicles, printing machines, textile machines, electronic machines, etc.
  Manufacturing process CNC machining Broaching, Drilling, Milling, Other Machining Services, Rapid Prototyping, Turning,
  QC inspection Make sure 100% inspection before the delivery
        If you have any other questions, please click here to “send an inquiry”

 

 

 DETAILED IMAGES

 

COMPANY PROFILE

 

EXHIBITION SHOW

PACKING AND DELIVERY

 

1. Inner Packing

For small products: 100PCS-200PCS per sealed plastic bag.
For bigger products: 2PCS-10PCS per plastic film roller (depends on the product size)

2. Outer Packing&Shipment Packing
8PCS-300PCS per carton (depends on the product size)
 

3.  Shipment Packing

18-24 cartons per wood case or pallet, shockproof and safe for transportation.

 

 

FAQ

Q: Are you trading company or manufacturer?
A: Our management is focused on exporting activities for more than 10 years and we have our own bushing factory. CHINAMFG is always professional and reliable. Our advantages are multiple resource integration, strong quality assurance and excellent service level. We are always responsible for our products.

Q: Hong long is your delivery time?
A: Generally 10-25 days after order. It depends on the quantity.

Q: Do you produce samples? Is it free or extra?
A: For standard products, we produce samples free of charge for our customers. And the express costs will be burdened by the customer, but can be returned after the order is placed.

Q: How to ensure the quality?
A: We produce as per the confirmed technology or drawings for each order for our customers. And our factory has a strict quality control system. We inspect goods during production according to a certain frequency and we also perform the final inspection before the goods are packed.

Q: Do you like to serve the customers only with small orders?
A: We are always glad to grow up together with all our customers whatever big or small.We hope our customers become stronger and stronger to be with us.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Customized: Customized
Certification: ISO, ISO 9001:2015
Standard Parts: Standard or non standard
Universal: Yes
Type: Bushing
Material: Nylon, rubber, PTFE, etc
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

plastic bush

Can I get advice on choosing plastic bushings for noise reduction in machinery or equipment?

If you are seeking advice on choosing plastic bushings for noise reduction in machinery or equipment, consider the following factors:

1. Material Selection:

– Look for plastic bushings made from materials specifically designed for noise reduction, such as acetal (POM), nylon, or polyurethane. These materials have inherent damping properties that can help reduce vibrations and noise.

– Consider the operating conditions of your machinery or equipment. Ensure that the chosen plastic bushings can withstand the temperature, humidity, and chemical exposure of the application environment.

2. Design and Fit:

– Choose bushings with a design that matches the specific requirements of your machinery or equipment. Consider factors such as the load-bearing capacity, clearance, and fit tolerance.

– Opt for bushings with a tight fit to minimize movement and vibration, which can contribute to noise generation. A snug fit can help dampen vibrations and reduce noise effectively.

3. Lubrication and Maintenance:

– Plastic bushings often require lubrication to minimize friction and noise. Consider whether the chosen bushings need periodic lubrication or if they are self-lubricating.

– Evaluate the maintenance requirements of the bushings. Some plastic bushings may require regular inspection and replacement if they wear out quickly, while others have a longer lifespan.

4. Compatibility and Performance:

– Ensure that the chosen plastic bushings are compatible with the machinery or equipment they will be used in. Consider factors such as shaft material, surface finish, and operating speed to ensure optimal performance.

– Look for bushings that have been specifically tested or certified for noise reduction applications. Manufacturers may provide information on noise reduction capabilities, such as decibel reduction or noise attenuation levels.

5. Expert Advice and Supplier Support:

– Consult with experts or suppliers specializing in plastic bushings for noise reduction applications. They can provide valuable guidance based on their knowledge and experience.

– Explain your specific requirements and provide details about the machinery or equipment to receive tailored recommendations and ensure the best possible noise reduction solution.

By considering material selection, design and fit, lubrication and maintenance, compatibility and performance, and seeking expert advice and supplier support, you can make an informed decision when choosing plastic bushings for noise reduction in machinery or equipment. Prioritize noise reduction properties while ensuring compatibility with the application and considering long-term performance and maintenance needs.

plastic bush

Where can I buy plastic bushings with self-lubricating properties for reduced maintenance needs?

If you are looking to purchase plastic bushings with self-lubricating properties to minimize maintenance requirements, there are several sources where you can find them. Here are some options to consider:

  • Directly from Manufacturers: Many manufacturers specialize in producing plastic bushings with self-lubricating properties. Visiting the websites of reputable manufacturers is a good starting point. Look for manufacturers that offer self-lubricating plastic bushings as part of their product line. Their websites often provide detailed information about their products, including specifications, performance characteristics, and ordering details. You can usually find contact information or request a quote directly from the manufacturer’s website.
  • Industrial Suppliers and Distributors: Industrial suppliers and distributors often carry a wide range of plastic bushings, including those with self-lubricating properties. These suppliers usually have catalogs or online platforms where you can search for and purchase the desired bushings. Some well-known industrial suppliers include Grainger, MSC Industrial Supply, and Motion Industries. Check their websites or contact them to inquire about the availability of self-lubricating plastic bushings.
  • Online Marketplaces: Online marketplaces can be a convenient option for purchasing plastic bushings with self-lubricating properties. Websites such as Amazon, eBay, or Alibaba have a vast selection of industrial components, including self-lubricating plastic bushings. When using online marketplaces, it is important to verify the seller’s reputation and reviews to ensure the quality and authenticity of the products being offered.
  • Local Industrial Supply Stores: Check if there are any local industrial supply stores or specialty bearing stores in your area. These stores often carry a variety of plastic bushings and can provide guidance on selecting the right self-lubricating bushings for your specific application. Visiting a local store allows you to physically examine the products and seek advice from knowledgeable staff before making a purchase.
  • Trade Shows and Exhibitions: Trade shows and exhibitions focused on industrial components and machinery are excellent venues to explore and source self-lubricating plastic bushings. These events bring together manufacturers, suppliers, and industry professionals, providing an opportunity to see and compare different products in person. Attend relevant trade shows or exhibitions in your region to connect with suppliers and learn about the latest advancements in self-lubricating bushing technology.

When purchasing plastic bushings with self-lubricating properties, consider factors such as the specific requirements of your application, the expected loads and operating conditions, and the compatibility with the mating surfaces. Additionally, ensure that the chosen supplier or manufacturer has a reputation for delivering high-quality products and reliable customer service.

By exploring these sources and considering the factors mentioned above, you can find reputable suppliers of plastic bushings with self-lubricating properties, enabling you to reduce maintenance needs and enhance the performance and longevity of your machinery or equipment.

plastic bush

Where can I find reliable suppliers for high-quality plastic bushings for industrial applications?

If you’re looking for reliable suppliers of high-quality plastic bushings for industrial applications, there are several avenues you can explore. Here are some sources where you can find reputable suppliers:

  • Online Industrial Directories: Online industrial directories such as Thomasnet, GlobalSpec, or Kompass provide comprehensive listings of suppliers, manufacturers, and distributors of various industrial products, including plastic bushings. These directories often allow you to filter search results based on location, industry, certifications, and other criteria, helping you find reliable suppliers that meet your specific requirements.
  • Trade Shows and Exhibitions: Attending trade shows or exhibitions related to industrial machinery, engineering, or maintenance can be an excellent way to connect with reputable suppliers. These events often feature booths or exhibits by manufacturers and suppliers of plastic bushings. You can engage in direct conversations, see product samples, and gather information about the supplier’s capabilities and product quality.
  • Industry Associations and Networks: Industry associations or networks related to your specific industrial application or sector can provide valuable resources and connections to reliable suppliers. These associations often have membership directories or supplier databases that can help you identify reputable suppliers of plastic bushings. Additionally, reaching out to fellow industry professionals through these networks can provide recommendations and insights on reliable suppliers they have worked with.
  • Manufacturer Websites: Many manufacturers of plastic bushings have their own websites where they showcase their products and provide information about their company and capabilities. Visiting these websites allows you to learn more about the manufacturer’s quality standards, certifications, production processes, and product range. Manufacturer websites often have contact information or inquiry forms that you can use to get in touch with them directly.
  • Referrals and Recommendations: Seek referrals or recommendations from colleagues, industry professionals, or machinery manufacturers who have experience in using plastic bushings. Personal recommendations can provide valuable insights into the reliability, quality, and customer service of specific suppliers. People who have had positive experiences with suppliers in the past can point you in the right direction.
  • Online Marketplaces: Online marketplaces such as Alibaba, Amazon Business, or Global Sources often feature a wide range of suppliers offering plastic bushings. These platforms provide user reviews, ratings, and detailed supplier profiles, helping you assess the reliability and quality of potential suppliers. However, exercise caution and perform due diligence when dealing with suppliers on online marketplaces to ensure their credibility and product quality.

When evaluating suppliers, consider factors such as their industry experience, reputation, product quality, certifications, delivery capabilities, and customer service. Request samples or product specifications to assess the quality of the plastic bushings they offer. It’s also beneficial to establish clear communication channels with the supplier to address any questions or concerns you may have.

By exploring these sources and conducting thorough research, you can find reliable suppliers of high-quality plastic bushings for your industrial applications, ensuring that you receive products that meet your requirements and perform optimally in your machinery.

China supplier Cheap Price Custom OEM Plastic Bushing Factory Sleeve Flange Flat Nylon PTFE POM Polyurethane Bushing For Machinery Spare Parts   define bushing	China supplier Cheap Price Custom OEM Plastic Bushing Factory Sleeve Flange Flat Nylon PTFE POM Polyurethane Bushing For Machinery Spare Parts   define bushing
editor by CX 2024-02-14

China Professional Wholesale Custom Nylon Bush Polyacetal POM Plastic Oil Free Straight Plain Bushing with Hot selling

Product Description

                                          Wholesale Custom Nylon Bush Polyacetal POM Plastic Oil Free Straight Plain Bushing

 

Product Name:

Plastic bushing

Application :

Domestic electrical, automotive ,engineering machinery ,industry ,etc

Material:

Nylon PA6, Nylon, ABS, POM,PTFE

Color:

Black/white/yellow or others

Material Density:

1.25~1.64g/cm3

Max PV value :

0.27~1.40 N/mm²·m/s

Tensile Strengthen:

40~90MPa

Hardness:

72~90 HRR

Thermal conductivity:

0.24 W/(m·k)

Friction:

0.08~0.26

Working Temperature:

-80~+240ºC

In addition to the standard product catalog is displayed, we provide non-standard product or to order according to customer requirements.

 

Packing & Delivery

Packing Details:
 

1. Inner Packing
For small products: 100pcs-200pcs per sealed plastic bag. For bigger products: 2pcs-10pcs per plastic film roller (depends on the product size)

2. Outer Packing&Shipment Packing

8pcs-300pcs per carton (depends on the product size)
18-24 cartons per wood case or pallet, shockproof and safe for transportation.

FAQ

Q: Are you trading company or manufacturer?
A: Our management is focused on exporting activities for more than 10 years and we have our own bushing factory. CHINAMFG is always professional and reliable. Our advantages are multiple resource integration, strong quality assurance and excellent service level. We are always responsible for our products

Q: Hong long is your delivery time?
A: Generally 10-25 days after order. It depends on the quantity.

Q: Do you produce samples? Is it free or extra?
A: For standard products, we produce samples free of charge for our customers. And the express costs will be burdened by the customer, but can be returned after the order is placed.

Q: How to ensure the quality?
A: We produce as per the confirmed technology or drawings for each order for our customers. And our factory has a strict quality control system. We inspect goods during production according to a certain frequency and we also perform the final inspection before the goods are packed.

Q: Do you like to serve the customers only with small orders?
A: We are always glad to grow up together with all our customers whatever big or small.

We hope our customers become stronger and stronger to be with us.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Customized: Customized
Certification: ISO, ISO 9001:2015
Standard Parts: Standard and Non Standard
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

Can I get advice on choosing plastic bushings for noise reduction in machinery or equipment?

If you are seeking advice on choosing plastic bushings for noise reduction in machinery or equipment, consider the following factors:

1. Material Selection:

– Look for plastic bushings made from materials specifically designed for noise reduction, such as acetal (POM), nylon, or polyurethane. These materials have inherent damping properties that can help reduce vibrations and noise.

– Consider the operating conditions of your machinery or equipment. Ensure that the chosen plastic bushings can withstand the temperature, humidity, and chemical exposure of the application environment.

2. Design and Fit:

– Choose bushings with a design that matches the specific requirements of your machinery or equipment. Consider factors such as the load-bearing capacity, clearance, and fit tolerance.

– Opt for bushings with a tight fit to minimize movement and vibration, which can contribute to noise generation. A snug fit can help dampen vibrations and reduce noise effectively.

3. Lubrication and Maintenance:

– Plastic bushings often require lubrication to minimize friction and noise. Consider whether the chosen bushings need periodic lubrication or if they are self-lubricating.

– Evaluate the maintenance requirements of the bushings. Some plastic bushings may require regular inspection and replacement if they wear out quickly, while others have a longer lifespan.

4. Compatibility and Performance:

– Ensure that the chosen plastic bushings are compatible with the machinery or equipment they will be used in. Consider factors such as shaft material, surface finish, and operating speed to ensure optimal performance.

– Look for bushings that have been specifically tested or certified for noise reduction applications. Manufacturers may provide information on noise reduction capabilities, such as decibel reduction or noise attenuation levels.

5. Expert Advice and Supplier Support:

– Consult with experts or suppliers specializing in plastic bushings for noise reduction applications. They can provide valuable guidance based on their knowledge and experience.

– Explain your specific requirements and provide details about the machinery or equipment to receive tailored recommendations and ensure the best possible noise reduction solution.

By considering material selection, design and fit, lubrication and maintenance, compatibility and performance, and seeking expert advice and supplier support, you can make an informed decision when choosing plastic bushings for noise reduction in machinery or equipment. Prioritize noise reduction properties while ensuring compatibility with the application and considering long-term performance and maintenance needs.

plastic bush

Where can I purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment?

If you are looking to purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment, there are several options available to you. Here are some places where you can find and purchase plastic bushings tailored for these industries:

  • Industrial Suppliers and Distributors: Industrial suppliers and distributors specializing in components for specific industries often carry plastic bushings designed for automotive or medical applications. These suppliers have a wide range of products and can provide guidance on selecting the right bushings for your specific requirements. Search for reputable industrial suppliers or distributors that cater to the automotive or medical sectors, and inquire about their available plastic bushing options.
  • Online Marketplaces and E-commerce Platforms: Online marketplaces and e-commerce platforms offer a convenient way to search for and purchase plastic bushings designed for specific industry applications. Platforms like Amazon, Alibaba, or ThomasNet have extensive catalogs of industrial components, including plastic bushings. Use relevant keywords such as “automotive plastic bushings” or “medical equipment bushings” to narrow down your search and explore the available options from different sellers.
  • Manufacturer Websites: Visit the websites of reputable manufacturers that specialize in producing plastic bushings for specific industries. Many manufacturers provide detailed product information, specifications, and application guides on their websites. Identify manufacturers known for their expertise in automotive or medical applications, and explore their product offerings. Manufacturer websites often have contact information or online inquiry forms that allow you to directly reach out for purchasing inquiries.
  • Trade Shows and Industry Events: Attend trade shows, exhibitions, or industry events related to the automotive or medical sectors. These events often feature a wide range of suppliers and manufacturers showcasing their products and innovations. It’s an excellent opportunity to connect with industry experts, explore the latest advancements in plastic bushings, and establish contacts with suppliers who specialize in serving specific industry applications.
  • Local Distributors and Retailers: Check if there are local distributors or retailers in your area that specialize in supplying components to the automotive or medical industries. These distributors often have physical stores or warehouses where you can personally visit, browse their product offerings, and make purchases. Local distributors may also provide personalized support and expertise to help you find the right plastic bushings for your application.

When purchasing plastic bushings designed for specific industry applications, it’s important to consider factors such as material compatibility, performance requirements, and industry-specific certifications or standards. Ensure that the chosen plastic bushings meet the necessary specifications and regulations for the intended application.

By exploring these purchasing options and consulting with industry experts, you can find and purchase plastic bushings that are specifically designed for automotive or medical equipment, ensuring optimal performance and compatibility with the requirements of these industries.

plastic bush

Where can I find reliable suppliers for high-quality plastic bushings for industrial applications?

If you’re looking for reliable suppliers of high-quality plastic bushings for industrial applications, there are several avenues you can explore. Here are some sources where you can find reputable suppliers:

  • Online Industrial Directories: Online industrial directories such as Thomasnet, GlobalSpec, or Kompass provide comprehensive listings of suppliers, manufacturers, and distributors of various industrial products, including plastic bushings. These directories often allow you to filter search results based on location, industry, certifications, and other criteria, helping you find reliable suppliers that meet your specific requirements.
  • Trade Shows and Exhibitions: Attending trade shows or exhibitions related to industrial machinery, engineering, or maintenance can be an excellent way to connect with reputable suppliers. These events often feature booths or exhibits by manufacturers and suppliers of plastic bushings. You can engage in direct conversations, see product samples, and gather information about the supplier’s capabilities and product quality.
  • Industry Associations and Networks: Industry associations or networks related to your specific industrial application or sector can provide valuable resources and connections to reliable suppliers. These associations often have membership directories or supplier databases that can help you identify reputable suppliers of plastic bushings. Additionally, reaching out to fellow industry professionals through these networks can provide recommendations and insights on reliable suppliers they have worked with.
  • Manufacturer Websites: Many manufacturers of plastic bushings have their own websites where they showcase their products and provide information about their company and capabilities. Visiting these websites allows you to learn more about the manufacturer’s quality standards, certifications, production processes, and product range. Manufacturer websites often have contact information or inquiry forms that you can use to get in touch with them directly.
  • Referrals and Recommendations: Seek referrals or recommendations from colleagues, industry professionals, or machinery manufacturers who have experience in using plastic bushings. Personal recommendations can provide valuable insights into the reliability, quality, and customer service of specific suppliers. People who have had positive experiences with suppliers in the past can point you in the right direction.
  • Online Marketplaces: Online marketplaces such as Alibaba, Amazon Business, or Global Sources often feature a wide range of suppliers offering plastic bushings. These platforms provide user reviews, ratings, and detailed supplier profiles, helping you assess the reliability and quality of potential suppliers. However, exercise caution and perform due diligence when dealing with suppliers on online marketplaces to ensure their credibility and product quality.

When evaluating suppliers, consider factors such as their industry experience, reputation, product quality, certifications, delivery capabilities, and customer service. Request samples or product specifications to assess the quality of the plastic bushings they offer. It’s also beneficial to establish clear communication channels with the supplier to address any questions or concerns you may have.

By exploring these sources and conducting thorough research, you can find reliable suppliers of high-quality plastic bushings for your industrial applications, ensuring that you receive products that meet your requirements and perform optimally in your machinery.

China Professional Wholesale Custom Nylon Bush Polyacetal POM Plastic Oil Free Straight Plain Bushing   with Hot selling		China Professional Wholesale Custom Nylon Bush Polyacetal POM Plastic Oil Free Straight Plain Bushing   with Hot selling
editor by CX 2024-02-13

China Hot selling Custom High Precision Large Gete Sprue Bushing CNC Locating Bushing for Plastic Moulds control arm bushing

Product Description

Custom High Precision Large Gete Sprue Bushing CNC Locating Bushing for Plastic Moulds

Backed by the team of experienced professionals, we are manufacturing and supplying an extensive range of mold core Inserts. It is designed by our skilled professionals using well-tested raw material in compliance with set industrial norms. In order to ensure quality and flawlessness, this product range undergoes stringent tests that are conducted by our quality controllers. Due to precise dimensions, corrosion resistance, sturdiness and durability, these are extensively demanded in the engineering industry.


 

Product Parameters

 

Material

1.2344

Hardness

48-52HRC

Heat treatment

Available

Service

Made-to-order

Surface treatment

/

Closest tolerance

+ – 0.01mm

Polishness

Ra0.6

Axiality

0.01mm

Verticality

0.01mm

Company Profile

HangZhou Xihu (West Lake) Dis.g Mould Parts Co., Ltd is established in 2008, is a professional manufacturer of precision mould parts. Our factory, located in the mould town–Chang’an. It is a professional company in research, development and manufacturing of precision mould components,we have over 10 years experience in this field,our advanced precision equipment and scientific quality control ensures customers satisfaction.

Machinery & Equipments

 

  • CNC machining center; CNC milling machine ,CNC lathe machine
  • Sodick EDM,Sodick Wire-cutting
  • OD Grinding,ID Grinding,Surface grinding machine

Our Service

1. Customer’s request is our purpose and target.
2. Quick samples delivery service and produce according to your BOM.
3. Professional production team, strictly quality control department, experienced sales department.
4. One-stop solution for our long term customers .
5. Customized size and OEM/ODM service acceptable.
6. 100% inspect before deliver , quality warranty and long term after-service .
7. Competitive price ,Excellent service , Quick delivery , Safety payment , Flexible trade terms.
 

Why choose us

  • We as a manufacturer are specialized in all kinds of precsion core pins cavity pins insert pins
  • Good experience of 8 years to make Stamping die parts,Injection die parts,Auto parts, metal-working products.
  • Have advanced production equipments and experienced operators.
  • Good experience of OEM and ODM for our customers.
  • Provide best price, good quality and fast delivery.

Main products
1.Core pin,cavity pin,insert pin etc
2.HSS punch ,Precision punch ,Special-shaped punch
3.Ejector pins,ejector sleeve,two-stage ejector pins etc
4.Xihu (West Lake) Dis. pillars ,Xihu (West Lake) Dis. bushings ,Xihu (West Lake) Dis. post set
5.Slide Core Units,Latch locks,locating Series

Quality Control

XIHU (WEST LAKE) DIS.G has strict quality control system from the raw material incoming to finished products outgoing. Our mould parts are guaranteed high precision,high polished and long service life.

Below are our main quality inspection items in the whole production process:
Material incoming: 100% inspection

Rough Finished:100% inspetion
Heat treatment: random inspection
Face grinding: 100% inspection
Center-less cylindrical grinding: 100% inspection
OD/ID grinding: 100% inspection

EDM:100% inspection

Wire-Cutting:100% inspection
Packing: the final 100% inspection before the formal shipment

 

Packaging & Shipping

Package 
Coated with anticorrosive oil, packed in carton box
Delivery
Delivery time is usually 7-15 working days for type of ejector pin, specific time is according to quantity.
ShippingWe ship using express such as DHL, UPS, FEDEX etc. or according to customer’s requirement . It takes about 3-5 days to arrive your front door, and proof of shippments are provided with a shipping or tracking number. And we ship by occean shippment for larger quantity items, it will be economic for customers.

FAQ

Q:Are you trading company or manufacturer?
A:We are factory.

Q:How long is your delivery time?
A: Generally it is 10-20 days if the goods are not in stock, it is according to quantity.

 

Q:What is your quote elements?
A:Product standard: model + size, or customer Drawing.

 

Q:How can you ensure the quality?
A:We have QC department to control the quality from the begining of production until goods finish.

 

Q:If you make poor quality goods,will you refund our fund?
A:As a matter of fact, we wont take a chance to do poor quality products. Meanwhile, we manufacture goods quality products until your satisfaction.

 

Q. Do you test all your goods before delivery?
A: Yes, we have 100% QC test and QC report for mold parts before delivery.

 

Q. Can you produce according to the samples or drawings?
A: Yes, we can produce parts by your samples or technical drawings.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: One Year
Shaping Mode: Plastic Molding Die
Surface Finish Process: Polishing
Mould Cavity: Multi Cavity
Plastic Material: POM
Application: Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware
Customization:
Available

|

Customized Request

plastic bush

What are the temperature and pressure limits of plastic bushings, and how do they impact their performance?

Plastic bushings have temperature and pressure limits that can significantly impact their performance. Here’s a detailed explanation:

Temperature Limits:

– Plastic bushings have specific temperature limits that dictate their ability to withstand heat or cold. These limits vary depending on the type of plastic material used in the bushings.

– It is crucial to consider the operating temperature range of the machinery or equipment in which the plastic bushings will be used. Exceeding the recommended temperature limits can cause the bushings to deform, lose their dimensional stability, or even melt, leading to a significant decrease in their performance and lifespan.

– High temperatures can accelerate wear, reduce load-bearing capacity, and negatively affect the lubrication properties of the bushings. Conversely, extremely low temperatures can make the plastic material brittle, leading to increased friction, noise, and potential failure.

– Consult the manufacturer’s specifications or technical data sheets for the plastic bushings to determine their temperature limits. This information will help you select bushings that can withstand the anticipated temperature conditions in your application.

Pressure Limits:

– Plastic bushings also have pressure limits that define their ability to withstand different levels of load or force. The pressure limits depend on the specific material and design of the bushings.

– Exceeding the recommended pressure limits can cause plastic bushings to deform, crack, or fail catastrophically. It can result in increased friction, accelerated wear, and compromised load-bearing capacity, ultimately leading to reduced performance and potential damage to the machinery or equipment.

– Consider the expected loads and forces that the bushings will experience in your application. Ensure that the selected plastic bushings have the necessary pressure rating to handle these loads without exceeding their limits.

– The pressure limits may also be influenced by factors such as the operating speed, surface finish, and lubrication conditions. Therefore, it is essential to consider these factors in conjunction with the pressure rating of the plastic bushings.

– Again, refer to the manufacturer’s specifications or technical data sheets to determine the pressure limits of the plastic bushings. This information will help you choose bushings that can safely handle the anticipated loads and pressures in your specific application.

Impact on Performance:

– Temperature and pressure limits directly impact the performance and longevity of plastic bushings. Operating the bushings beyond their specified limits can lead to premature wear, increased friction, elevated noise levels, reduced load-bearing capacity, and potential failure.

– It is crucial to select plastic bushings that are capable of operating within the anticipated temperature and pressure ranges of your application. This ensures optimal performance, extended service life, and reliable operation of the machinery or equipment.

– Additionally, maintaining the bushings within their recommended temperature and pressure limits helps preserve their dimensional stability, lubrication properties, and overall functionality, contributing to smoother operation and reduced maintenance requirements.

– Regular inspection and monitoring of the plastic bushings’ performance, along with adherence to the specified temperature and pressure limits, can help identify any potential issues early on and allow for timely replacement or maintenance, ensuring continued performance and avoiding costly downtime.

Considering the temperature and pressure limits of plastic bushings and their impact on performance is crucial for selecting the appropriate bushings for your application. Always consult the manufacturer’s specifications and guidelines to ensure optimal performance and longevity of the bushings in your specific operating conditions.

plastic bush

What are the common sizes and dimensions of plastic bushings, and how do I choose the right one for my application?

When selecting plastic bushings, it’s important to consider the appropriate sizes and dimensions to ensure compatibility with your application. Common sizes and dimensions of plastic bushings can vary depending on the specific industry and application requirements. Here’s some information to help you understand the common sizing aspects and guide you in choosing the right plastic bushing for your application:

  • Inner Diameter (ID): The inner diameter refers to the measurement of the opening of the bushing, which corresponds to the shaft or pin it will be mounted on. It is crucial to select a plastic bushing with an inner diameter that matches the diameter of the shaft or pin in your application. Measuring the shaft or pin accurately will help you determine the appropriate inner diameter of the bushing.
  • Outer Diameter (OD): The outer diameter refers to the measurement of the outside surface of the bushing. It corresponds to the bore or housing in which the bushing will be inserted. Ensure that the outer diameter of the plastic bushing matches the dimensions of the bore or housing to achieve a proper fit and alignment.
  • Length: The length of the plastic bushing is the distance between the two ends of the bushing. It determines the amount of space occupied by the bushing within the application. Consider the available space and clearance in your application to select a plastic bushing with an appropriate length that fits without interference.
  • Flange or Collar: Some plastic bushings may have a flange or collar at one end, which provides additional support or acts as a stopper. The presence of a flange or collar can affect the overall dimensions and installation requirements of the bushing. Determine if your application requires a bushing with a flange or collar, and consider the additional dimensions it adds to the overall size.
  • Wall Thickness: The wall thickness of the plastic bushing refers to the thickness of the material between the inner and outer surfaces of the bushing. It plays a role in determining the strength and load-bearing capacity of the bushing. Consider the expected loads and forces in your application to select a bushing with an adequate wall thickness to handle the required load requirements.

In order to choose the right plastic bushing for your application, it is recommended to follow these steps:

  1. Identify the specific dimensions and requirements of your application, such as the required inner diameter, outer diameter, length, and any additional considerations like flanges or collars.
  2. Refer to the manufacturer’s documentation, catalogs, or product datasheets to identify plastic bushings that match your required dimensions and meet the performance criteria for your application.
  3. Consider the load capacity, speed limitations, temperature range, and other relevant factors specified by the manufacturer to ensure the selected bushing meets the performance requirements of your application.
  4. If necessary, consult with application engineers or technical experts who can provide guidance based on their experience and knowledge of plastic bushings.
  5. Procure a sample or a small quantity of the selected plastic bushing to test its fit, function, and performance in your specific application before proceeding with larger-scale implementation.

By considering the common sizes and dimensions of plastic bushings and following the selection process outlined above, you can choose the right plastic bushing that fits your application’s requirements, ensuring proper functionality and performance.

plastic bush

Are there different types of plastic materials used in manufacturing plastic bushings, and how do they affect performance?

Yes, there are different types of plastic materials used in manufacturing plastic bushings, and the choice of material can significantly affect their performance. Here are some common types of plastic materials used in plastic bushings and how they can impact performance:

  • Nylon: Nylon is a widely used material for plastic bushings. It offers good wear resistance, low friction, and excellent load-carrying capacity. Nylon bushings are self-lubricating, reducing the need for additional lubrication. They are suitable for a wide range of applications and can operate in both dry and lubricated conditions.
  • PTFE (Polytetrafluoroethylene): PTFE, commonly known by the brand name Teflon, is a high-performance plastic material with exceptional low-friction properties. PTFE bushings have excellent chemical resistance, operate well in high-temperature environments, and exhibit low wear rates. They are often used in demanding applications where high precision and low friction are critical.
  • UHMW (Ultra-High-Molecular-Weight Polyethylene): UHMW is a durable and tough plastic material known for its high impact strength and abrasion resistance. UHMW bushings offer low friction, good chemical resistance, and excellent wear properties. They are commonly used in applications involving heavy loads, impact, or abrasive conditions.
  • POM (Polyoxymethylene): POM, also known as acetal or Delrin, is a high-strength engineering plastic with good dimensional stability and low friction. POM bushings exhibit low moisture absorption, excellent wear resistance, and a low coefficient of friction against metal surfaces. They are suitable for applications requiring high precision, low wear, and resistance to moisture or chemicals.
  • Composite Polymers: Composite polymers are materials that combine different plastic resins or incorporate reinforcing fibers or fillers. These composite materials can offer enhanced mechanical properties such as increased strength, improved wear resistance, or reduced friction. Composite polymer bushings are tailored for specific applications, and the choice of composite formulation depends on the desired performance characteristics.

The choice of plastic material for a specific application depends on various factors, including the operating conditions, load requirements, temperature range, speed, and environmental factors. Each plastic material has its own unique properties and advantages, which make them suitable for specific applications. For example, nylon bushings may be preferred for their balanced performance and versatility, while PTFE bushings excel in applications requiring low friction and high temperature resistance.

When selecting a plastic material for bushings, it’s important to consider factors such as load capacity, wear resistance, coefficient of friction, chemical resistance, temperature range, and compatibility with mating surfaces. Manufacturers and suppliers of plastic bushings can provide guidance on selecting the appropriate material based on your specific application requirements.

It’s worth noting that the performance of plastic bushings can be influenced by factors such as design considerations, surface finish, mating materials, and operating conditions. Proper installation, regular maintenance, and adherence to manufacturer guidelines are crucial for achieving optimal performance and longevity of plastic bushings in industrial applications.

By understanding the different types of plastic materials available and their impact on performance, you can make informed decisions when selecting plastic bushings for your specific application needs.

China Hot selling Custom High Precision Large Gete Sprue Bushing CNC Locating Bushing for Plastic Moulds   control arm bushing						China Hot selling Custom High Precision Large Gete Sprue Bushing CNC Locating Bushing for Plastic Moulds   control arm bushing
editor by CX 2024-02-07

China Custom Processing of Structural Parts of Plastic and Metal Materials Drilling Bushing Bending Stamping Tapping Laser Cutting Part differential bushing

Product Description

Product Description

 

15 years experience in cnc machining workshop in HangZhou offering fast cnc prototyping and mass production service

Quotation: According to your drawing(size, material, thickness, processing content, and required technology, etc) . 
Drawing Formats: STEP, STP, GIS, CAD, PDF, DWG, DXF, etc, or samples.
Lead time: In general:15 workdays.
Minimum Order:  1PCS,Comply with customer’s demand. 
Material: Aluminum (6061-T6, 6063, 7075-T6,5052), etc…  
Brass: C36000 (HPb62), C37700 (HPb59), C26800 (H68), C22000(H90) etc/Copper/Bronze, etc…   
Stainless Steel (302, 303, 304, 316, 420), etc…  
Steel (mild steel, Q235, 20#, 45#), etc…    
Titanium: TA1, TA2/GR2, TA4/GR5, TC4, TC18, etc.  
Alloy, SPCC, iron, etc…     
Plastic (ABS, Delrin, Nylon,PP, PE, PVC,POM,PC, Acrylic), etc…   
Process: CNC Machining, CNC turning, CNC milling, CNC lathe machining, CNC boring, CNC grinding, auto lathe,CNC drilling, bushing, bending, stamping, tapping, Laser cutting,Vacuum Casting, Custom Silicone Molding, etc…  
Surface treatment:   Clear,color anodized, Hard anodized, Powder-coating,Sand-blasting, Painting ,Nickel plating, Chrome plating, Zinc plating, Silver/gold plating, Anodizing, Polishing, Electrophoresis, QPQ(Quench-Polish-Quench), Sandblast,Brushing, Oxide, Silk Print, Laser engraving, Heat treatment, Surface chamfering, Tempering, Knurl, etc…
General Tolerance:  +/-0.01mm ~ +/-0.05mm
Surface roughness:  Ra 0.1~3.2
Testing Equipment: CMM/YVM/Tensile Testing Machine/Hardness Test Machine/Ultrasonic Flaw Detector/Surface Roughness Measuring Instrument/Micrometer/Caliper/Thread Gauge/High Gauge /Trapezoidal thread plug gauge / Hardness Test.
QC System: 100% inspection before shipment.    
Certification: ISO9001:2008, ROHS.    
Production capacity:  500,000pieces per month depending on the complicacy of different products and the quantity. 
Machining Scope: 1). Equipment/Machinery.                             
2). Medical & Technological parts.
3). The Automotive/motorcycle parts.
4). The telecommunication parts.   
5). The power tool parts.  
6). Bicycle parts.  
7). The agricultural parts.   
8). Hardware.  
9).Toys.
Experience:  15 years of CNC machining products experience.    
Packaging:  Standard: pearl cotton and bubble bag, carton box and seal, Prevent damage.    
For large and big quantity: pallet or as per customers’ requirement.  
Term of Payment:   T/T, Paypal, etc…  
Delivery way: Express(DHL, FedEx, UPS, TNT, EMS), By Sea, By air, or on your requirement .
Our Advantages: 1).24-hours online service & Quickly Quote/Delivery.
2).100% QC quality inspection before delivery, and can provide quality inspection form.
3).16+ years of experience in the CNC machining area and have a senior design team to offer perfect modification suggestions. 
Note: All parts are not in stock, custom made according to customer’s drawings or samples!
If you have any parts to be made, please feel free to send your kind drawings  . 

 

 

Category


Production Process
1.According to the requirements of the customer’s order, we’ll hold a meeting for discussion and arrangement

2.Program the ordered product

3.Purchase the materials according to the processing size in the program

4.Debugging the equipment and then machining the materials

5.Some products need to be processed by CNC turning

6.Some products need to be processed by CNC machining

7.The finished product will be inspected for the first time

8.Qualified products will be finished the Surface treatment according to the order

9.After all processing requirements of the product are completed, we will conduct the final quality inspection

10.Assemble qualified products

11.All qualified products will be packaged, and the packaging should be shock-proof, pressure-proof and scratch-proof

12.The packaged products will be delivered according to the customer’s order requirements

Company Profile

  Shen Zhen New Source Mold Industrial Limited, Located in Xihu (West Lake) Dis. District HangZhou China. We also called Shen Zhen Xin Yuan Mold Industrial Limited. The company covers an area of 2000 square CHINAMFG and has nearly 100 experienced employees.

  We have more than 40 sets of advanced processing equipment including 3-axis,4-axis, 5-axis CNC, and gantry CNC. milling machine, lathe, drilling machine, sand blasting machine, and other advanced processing equipment.

  Xin Yuan Mold is committed to being an ideal partner for CHINAMFG customers to help them to turn their designs into great products, involving from the early rapid prototyping stage to small-lot production and then to final mass production.

  Xin Yuan Rapid Prototype has 1 rapid prototyping services factory and other joint venture specializing in sheet metal prototyping and sheet metal fabrication located in HangZhou city, China.Xin Yuan Rapid Prototype China is providing CHINAMFG customers with a broad range of subtractive or additive rapid prototyping services such as CNC machining, sheet metal prototyping, custom sheet metal fabrication, stereolithography or SLA 3D Printing, vacuum casting, surface treatment, extrusion prototyping, silk screen, pad printing, rapid tooling, and rapid plastic injection molding, etc.

  The main material includes Aluminum, Magnesium, Zinc alloy copper stainless steel, POM, PEEK, And other metal and plastic materials. The machining accuracy can achieve 0.01mm, Xin Yuan Mold has three-dimensional coordinate testing instruments,2.5-dimensional testing instruments, an altimeter high-power magnifying glass micrometer height gauge, Roughness tester, and other high-precision testing instruments, We guarantee that 100% products will be inspected before shipment.

  At the same time, Xin Yuan Mold is a professional manufacturer of injection mold making, injection molding, secondary operations, and mechanical assembly.We are dedicated to serving our customers in a wide range of industries including Automotive, Electronic Appliances, Mobile Communication, Medical Devices, and Toys with high-quality products, competitive pricing, and quick on-time delivery.

  With rich and CHINAMFG experience, vast capabilities, and advanced equipment, Xin Yuan Mold provides high-quality, proven solutions for all your rapid prototyping, low-volume, and mass-production needs.

  If you want to learn more about Xin Yuan Mold China, please do not hesitate to contact us for more information about our rapid prototyping services capabilities. If you are traveling to China, we would warmly welcome you to visit us and meet you in person to hear more about the project you are working on!

Company Strength
1. The gantry milling machine can process the surface with multiple milling cutters at the same time, with high processing accuracy and production efficiency. It is suitable for processing the plane and inclined plane of large workpieces in batch and mass production. The CNC gantry numerical control machine can also process space-curved surfaces and some special parts.

2. Five-axis machining: Using CNC to move cutting equipment or different parts on 5 different axes simultaneously by rotating a table or cutting tool, avoiding collisions with fixed equipment parts and providing space for the production of very complex parts

3. CNC turning center, is a kind of high-precision, high-efficiency automatic machine. Can be processed in a straight cylinder, oblique cylinder, arc, and various threads. More suitable for mass production of complex parts.

4. mobile CNC automatic: lathe machine is a lathe milling integration and has an automatic feeding machine, mainly used for the processing of small parts of the bar, high processing precision, processing speed, very suitable for the diameter of the round bar within 38mm mass processing

5. Aluminum CNC Machining Center: is a full-function CNC machining machine tool,  through three-dimensional data programming, directly processed out of the required products, processed parts can be sprayed, electroplating, screen printing, coating surface treatment, can be assembled, better reflect the design function of the product

6. CNC machining centers can also be divided into 3-axis, 4-axis and5- axis machining centers. The 3-axis CNC machining center provides 3-axis linkage control, enabling tools to handle complex surfaces. The 5-axis machining center is on the basis of a 3-axis, there are 2 rotating axes, can be processed more complex structures, Suitable for plastics such as ABS, PC, PP, PE, POM, PA, PMMA, EPS, etc. Metal: Steel, aluminum alloy, zinc alloy, copper, etc.

7. Laser Cutting Machine: Metal laser cutting machine: laser cutting carbon steel, silicon steel sheet, stainless steel plate, aluminum alloy profiles, aluminum alloy, galvanized steel, hot rolled plate, galvanized steel, copper, and other metal composite materials, can be completed rapidly laser cutting. Because of high coordination ability, faster laser cutting speed, high-efficiency laser cutting, short commodity cycle time, sheet metal laser cutting machine is widely used

8. The 3D printing machine: The printer reads the cross sections in the file, prints them out layer by layer using liquid, powder,  or sheet material, and then glues the layers together in various ways to create a CHINAMFG object. The technology is characterized by the fact that it can be made in almost any shape, it is very fast and low costQuality

Control System
Xin Yuan Mold has three-dimensional coordinate testing instruments,2.5-dimensional testing instruments, an altimeter high-power magnifying glass micrometer height gauge, a Roughness tester, and other high-precision testing instruments, We guarantee that 100% of products will be inspected before shipment.

1. Coordinate Measuring Machine: It can accurately measure the size, Angle, shape, and position of various workpieces, as well as various parameters of threaded parts, and is mostly used for quality inspection and comparison.

2. Video Measurement System: After the workpiece image is taken by the image detection system, the image data is transmitted to the computer, and the measurement software is used to measure various geometric elements and analyze the data. Its advantage is the high accuracy of measurement, measurement data can be directly input into AutoCAD, become a complete engineering drawing.

3. Tensile Testing Machine: is used for a variety of metal and non-metallic materials for instruments and equipment static load, tensile, compression, bending, shearing, tearing, stripping, and other mechanical properties of the mechanical testing machine.

4. Hardness Tests can reflect the mechanical properties of metal materials under different chemical compositions, organizational structures, and heat treatment conditions. Hardness test is widely used to test the properties of metal materials, monitor the correctness of the heat treatment process, and study new materials.

5. Ultrasonic Flaw Detector: It can detect, locate, evaluate, and diagnose various defects in the workpiece without damage, such as cracks, welds, pores, sand holes, inclusions, folding, and so on.

6. Surface Roughness Measuring Instrument: It can be used to detect the roughness of surfaces of different shapes, including plane, outer circle, inner hole, groove, and other difficult-to-measure surfaces.

7. Caliper: It is widely used for accurate measurement of workpiece length, inside and outside diameter, and depth measuring tools.

8. High Gauge: It is used to measure the size of the product, such as some two-dimensional dimensions such as circle, radian, Angle, distance, etc., which is the best tool to ensure the qualified size of the product.

9. Thread Gauge: It is usually used to check whether the size of the thread is correct. Thread size is composed of thread diameter and pitch. Usually in the selection of thread gauge to know the test thread specification.

Certifications

Packaging&Shipping
Packaging:

1. We use soft foam to pack the products, and then put the packaged products into standardized cartons and do a good job of boxing. This can play a scratch-proof, pressure-proof and shock-proof effect on the product.

2. We can also arrange packaging and shipping according to your requirements.

3. To facilitate customs clearance, we will put the product code on the package. However, we will not put the customer’s information on it, such as the logo, etc. We will do a good job of keeping the customer’s information confidential.

Shipping:

There are 4 options as follows:

1. International express: UPS, FedEx, DHL, TNT, Post, etc.

2. Port transportation: all ports. 

3. We deliver according to customer’s requirements.

4. Insurance for the goods according to the contract.

Customer Reviews

Recommended Products

FAQ

1. How can I customize my products?
Kindly please provide the 2D/3D drawings (PDF/DWG/DXF/IGS/STP/SLDPRT/etc)  with details(Surface treatment, material, quantity, and special requirements, etc).

2. How g long i can get the quotation?
We will offer the quotation within 48 hours(Considering the time difference).

3. Are there any other requirements for the order?
OEM&ODM are welcomed.

4. Can I get a sample for testing?
We will offer free or charged samples depending on the products.

5. How long will you produce the parts?
Normally 2 weeks, we will arrange the production schedule depending on the quantity and the delivery.

6. What are your payment terms?
We can accept Western Union or Paypal for small, and for big quantities, T/T is preferred.

7. How about transportation?
By sea or by air and international express service

8. What if the products we received are not good?
Contact us without hesitation, the after-sales service will take responsibility.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory, Machinery, Electronics & Computer, etc.
Standard: GB, EN, API650, China GB Code, JIS Code, TEMA, ASME
Surface Treatment: Clear/Color Anodized, Hard Anodized, etc.
Samples:
US$ 150/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

plastic bush

Can I get advice on choosing plastic bushings for noise reduction in machinery or equipment?

If you are seeking advice on choosing plastic bushings for noise reduction in machinery or equipment, consider the following factors:

1. Material Selection:

– Look for plastic bushings made from materials specifically designed for noise reduction, such as acetal (POM), nylon, or polyurethane. These materials have inherent damping properties that can help reduce vibrations and noise.

– Consider the operating conditions of your machinery or equipment. Ensure that the chosen plastic bushings can withstand the temperature, humidity, and chemical exposure of the application environment.

2. Design and Fit:

– Choose bushings with a design that matches the specific requirements of your machinery or equipment. Consider factors such as the load-bearing capacity, clearance, and fit tolerance.

– Opt for bushings with a tight fit to minimize movement and vibration, which can contribute to noise generation. A snug fit can help dampen vibrations and reduce noise effectively.

3. Lubrication and Maintenance:

– Plastic bushings often require lubrication to minimize friction and noise. Consider whether the chosen bushings need periodic lubrication or if they are self-lubricating.

– Evaluate the maintenance requirements of the bushings. Some plastic bushings may require regular inspection and replacement if they wear out quickly, while others have a longer lifespan.

4. Compatibility and Performance:

– Ensure that the chosen plastic bushings are compatible with the machinery or equipment they will be used in. Consider factors such as shaft material, surface finish, and operating speed to ensure optimal performance.

– Look for bushings that have been specifically tested or certified for noise reduction applications. Manufacturers may provide information on noise reduction capabilities, such as decibel reduction or noise attenuation levels.

5. Expert Advice and Supplier Support:

– Consult with experts or suppliers specializing in plastic bushings for noise reduction applications. They can provide valuable guidance based on their knowledge and experience.

– Explain your specific requirements and provide details about the machinery or equipment to receive tailored recommendations and ensure the best possible noise reduction solution.

By considering material selection, design and fit, lubrication and maintenance, compatibility and performance, and seeking expert advice and supplier support, you can make an informed decision when choosing plastic bushings for noise reduction in machinery or equipment. Prioritize noise reduction properties while ensuring compatibility with the application and considering long-term performance and maintenance needs.

plastic bush

Where can I purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment?

If you are looking to purchase plastic bushings designed for specific industry applications, such as automotive or medical equipment, there are several options available to you. Here are some places where you can find and purchase plastic bushings tailored for these industries:

  • Industrial Suppliers and Distributors: Industrial suppliers and distributors specializing in components for specific industries often carry plastic bushings designed for automotive or medical applications. These suppliers have a wide range of products and can provide guidance on selecting the right bushings for your specific requirements. Search for reputable industrial suppliers or distributors that cater to the automotive or medical sectors, and inquire about their available plastic bushing options.
  • Online Marketplaces and E-commerce Platforms: Online marketplaces and e-commerce platforms offer a convenient way to search for and purchase plastic bushings designed for specific industry applications. Platforms like Amazon, Alibaba, or ThomasNet have extensive catalogs of industrial components, including plastic bushings. Use relevant keywords such as “automotive plastic bushings” or “medical equipment bushings” to narrow down your search and explore the available options from different sellers.
  • Manufacturer Websites: Visit the websites of reputable manufacturers that specialize in producing plastic bushings for specific industries. Many manufacturers provide detailed product information, specifications, and application guides on their websites. Identify manufacturers known for their expertise in automotive or medical applications, and explore their product offerings. Manufacturer websites often have contact information or online inquiry forms that allow you to directly reach out for purchasing inquiries.
  • Trade Shows and Industry Events: Attend trade shows, exhibitions, or industry events related to the automotive or medical sectors. These events often feature a wide range of suppliers and manufacturers showcasing their products and innovations. It’s an excellent opportunity to connect with industry experts, explore the latest advancements in plastic bushings, and establish contacts with suppliers who specialize in serving specific industry applications.
  • Local Distributors and Retailers: Check if there are local distributors or retailers in your area that specialize in supplying components to the automotive or medical industries. These distributors often have physical stores or warehouses where you can personally visit, browse their product offerings, and make purchases. Local distributors may also provide personalized support and expertise to help you find the right plastic bushings for your application.

When purchasing plastic bushings designed for specific industry applications, it’s important to consider factors such as material compatibility, performance requirements, and industry-specific certifications or standards. Ensure that the chosen plastic bushings meet the necessary specifications and regulations for the intended application.

By exploring these purchasing options and consulting with industry experts, you can find and purchase plastic bushings that are specifically designed for automotive or medical equipment, ensuring optimal performance and compatibility with the requirements of these industries.

plastic bush

Can I get recommendations for plastic bushings suitable for high-temperature applications?

When it comes to high-temperature applications, selecting the right plastic bushings is crucial to ensure optimal performance and reliability. While many plastic materials have temperature limitations, there are specific types of plastic bushings that are designed to withstand elevated temperatures. Here are some recommendations for plastic bushings suitable for high-temperature applications:

  • PTFE (Polytetrafluoroethylene) Bushings: PTFE is a commonly used material for high-temperature applications due to its exceptional resistance to heat. PTFE bushings can operate in temperatures ranging from -200°C to +260°C (-328°F to +500°F) without significant loss of performance. They exhibit low friction, excellent chemical resistance, and maintain their dimensional stability at high temperatures.
  • PEEK (Polyether Ether Ketone) Bushings: PEEK is a high-performance thermoplastic that offers excellent mechanical properties and thermal stability. PEEK bushings can withstand temperatures up to +250°C (+482°F) continuously and have short-term temperature resistance up to +300°C (+572°F). They possess low friction, high wear resistance, and good chemical resistance, making them suitable for demanding high-temperature applications.
  • PI (Polyimide) Bushings: Polyimide, often referred to by the brand name Vespel, is a high-temperature polymer known for its excellent thermal stability and mechanical properties. PI bushings can operate in temperatures exceeding +300°C (+572°F) continuously. They offer low wear rates, high strength, and good dimensional stability, making them suitable for extreme high-temperature environments.
  • PEI (Polyetherimide) Bushings: PEI is a high-temperature engineering plastic with good mechanical properties and thermal resistance. PEI bushings can withstand temperatures up to +170°C (+338°F) continuously. They exhibit low creep, high dimensional stability, and good chemical resistance, making them suitable for applications where moderate high-temperature performance is required.
  • PPS (Polyphenylene Sulfide) Bushings: PPS is a high-performance thermoplastic that offers excellent heat resistance. PPS bushings can operate in temperatures up to +200°C (+392°F) continuously. They possess good dimensional stability, low moisture absorption, and high chemical resistance, making them suitable for high-temperature and chemically aggressive environments.

It’s important to note that the temperature ranges mentioned above are general guidelines and can vary depending on specific grades and formulations of the plastic materials. Additionally, the performance of plastic bushings in high-temperature applications can be influenced by factors such as load, speed, and the presence of external factors like chemicals or abrasive particles. Therefore, it’s advisable to consult with the manufacturer or supplier of the plastic bushings to ensure they are suitable for your specific high-temperature application.

When selecting plastic bushings for high-temperature applications, consider factors such as temperature resistance, load capacity, wear resistance, coefficient of friction, and compatibility with mating surfaces. Additionally, ensure that the installation and operating conditions are within the recommended guidelines provided by the manufacturer to maximize the performance and lifespan of the bushings.

By choosing plastic bushings specifically designed for high-temperature applications, you can ensure reliable and long-lasting performance in environments where elevated temperatures are a concern.

China Custom Processing of Structural Parts of Plastic and Metal Materials Drilling Bushing Bending Stamping Tapping Laser Cutting Part   differential bushingChina Custom Processing of Structural Parts of Plastic and Metal Materials Drilling Bushing Bending Stamping Tapping Laser Cutting Part   differential bushing
editor by CX 2024-02-05