China Power Swivels Spinner and Bushing bushing adapter

Product Description

 

DSL SERIES OF POWER SWIVEL
DSL Power Swivel is the device to in­ stall on the derrick of servicing rig, to provide rotating power. Except the use for such work­ over jobs as casing milling. milling, drilling cement plug and bridge plug and fishing. it is also used for sidetracking drilling, drilling open hole and coring. The product is designed and  manufactured according to API Spes 8C specifi­tion.
Main specifications:

Model DSL-110 DSL-135
Max. static load kN 1100 1350
US ton 120 150
Dynamic load rating kN 600 1080
US ton 65 120
Max. speed
 
rpm 150 150
MPa 35 35
Max. pressure
 
psi 5000 5000
N.m 8450 16000
Max. torque ft.lbf 6300 11800
Gooseneck connection 3LP 3LP
Sub connection 31/2 IF 31/2 IF
Size mm 2361x953x865 2480x1180x950
in 93×37.5×34 97.5×46.5×37.5
Weight kg 910 1400
lb 2000 3080

SERIES OF SPINNERS
 

Technical Specifications

Model XSL160.2C XSL225.2C            XSL315.2C            XSL450.2C
Air pressure MPa 0.7~0.9
psi 101~130
Rated torque N.m 1300 1600
ft.lbf 959 1180
Brake torque N.m 1600 2500
ftlbf 1180 1840
Rated speed rpm 80 70
Rotating direction   Single direction Double direction
Size mm 608X450X440 740X565X475
in 24X18X17 29X21X19
Weight kg 218 272
lb 480 600
Suited for SL135, SL170 SL225,SL315,SL450

TECHNICAL SPECIFICATION:

Model XSL160.2B XSL225.2B
Rated flow L/min 114
gpm 30.1
Rated pressure MPa 12
psi 1740
Rated torque N.m 2590 2850
ft.lbf 1910 2100
Rated speed rpm 66 70
Size mm 817X626X486 900X750X550
in 32.1X24.6X19.1 35.4X29.5X21.7
Weight kg 280 350
lb 617 772
Suited for SL135,SL170 SL225

ROLLER KELLY BUSHING
The bushing is to drive kelly by matching with rotary bushing. There are 2 drive modes: square drive and pin drive. Three types: heavy, medium, and light. For kelly: Square and Hexagonal . It fits for 1 71 /2-491 /2in rotary tables. The product is designed and manufactured according to API Spec 7K Specification for Drill and well servicing Equipment.
Technical Specifications

Model HDS 27-HDP 20-HDP MDS 20-MDP 17-MDP LDS  
Type Heavy Medium Light  
Max. torque N.m 32365 22555 13729  
ft.
lbf
23871 16636 10126  
 
Drive Mode   Square Pin Square Pin Square  
 
Square in 3~6 2 1/2~5 1/4 2 1/2~ 4 1/4 2 1/2 ~5 1/4  
Hex in 3~6 3 ~ 4 1/4 3 ~ 4 1/4  
  mm 630X630X740 630X630X780 493X493X696 510X510X720 458X458X700 508 X 508X 700  
Size in 24.8X24.8X29.1 24.8X24.8X30.7 19.4X19.4X27.4 20 X 20 X 28.3 18X18X27.5 20X 20X 27.5  
  kg 700 730 670 500 460 340 400  
Weight lb 1540 1610 1470 1100 1012 750 808  

 

KELLY SPINNER
Kelly spinner is a special equipment to connect single pipe by matching with mouse hole clamping device. It unitizes air or hydraulic motor to drive kelly to rotate. And it has the features of security, labor saving and high effi­ciency .It is designed and manufactured accord­ing to API Spec 8C “Specification For Drilling and Production Hoisting Equipment”.
Technical Specificat ions

Model FXD                       QF2 Q3 A6C 6600 6800
Drive mode Pneumatic Driven Hydraulic Driven
Max. static load kN 2250
Us tom 250
Pressure MPa 0.5-0.9 13.8
psi 72-130 2000
Brake torque Nm 1200 1600 1650 1500 1500 1650
ft.lbf 885 1180 1215 1100 1100 1215
die speed rpm 76 72 72 170 130 110
Rotating direction Single Double
Stem connection 6-5/8 REG LH
Size mm 845X740X725 558X558X935 860X725X980 768X768X1225 740X710X978 740X710X978
in 33X29X28 22X22X37 34X28X39 30X30X48 29X28X38.5 29X28X38.5
Weight kg 383 450 520 540 500 504
lb 844 992 1146 1190 1100 1110

 

QQD PNEUMATIC CASING ELEVATOR/SPIDER  
QD pneumatic casing elevator/spider is applicable for casing of 60~622mm(23/8~241/2 in) It features labor saving, safe and pneumatic operation. It is a kind of ideal tool for casing opera­tion .It is designed and manufactured according to API Spec 8C “Specification For Drilling and Production Hoisting Equipment”.
Technical Specifications

Model QD622-450(API500) QD450(API500) QD315(API350) QD135(API150)
Applicable range mm 324-622 89-356 89-340 60-139.7
in 123/4~24 ‘/2 3’/2-14 3’/2-133/8 23/8-5’/2
Rated load kN 4500 4500 3150 1350(3’/2)> 900(5’/2)
US ton 500 500 350 150(3’/2) ^     100(5’/2)
Air pressure MPa 0.5-0.9
psi 72-130
Size elevator mm 1886X1470X1070 1390X1290X915 1335X1040X806 990X645X550
in 74.3X57.9X42.1 55X51X36 52.5X41X31.7 39X25.4X21.6
spider mm 1886X1470X970 1390X1290X970 1335X1040X872 810X730X560
in 74.3X57.9X38.2 55X51X38 52.5X41X34.2 31.9X28.7X22
Weight kg 12000 9900 7550 1430
lb 26450 21820 16640 3152

 

ZP SERIES OF ROTARY TABLES
As 1 of important parts of drill rig. ZP series of rotary tables are widely used to rotate drill equipment and hold the weight of pipes in well. They are designed and manufactured ac­cording to API Spec 7K “Specification For Drilling and well servicing Equipment’.
Technical Specifications

Model ZP375 ZP275 ZP205 ZP175
Max. static load kN 5850 4500 3150 1350
US ton 650 500 350 150
Bore diameter mm 952.5 698.5 520.7 444.5
in 37’/2 27% 20% 17’/2
Gear ratio   3.56 3.67 3.22 3.58
Distance from table axis to the center of inner row of sprocket mm 1353 1353 1353 1118
in 531/4 531/4 531/4 44
Size mm 2468X1810X718 2392X1670X685 2292X1475X668 1935X1280X585
in 97X71X28 94X66X27 90X58X26 76X50X23
Weight kg 8026 6203 5530 3888
lb 17694 13680 12190 8572

ROTARY BUSHING AND INSERT SERIES
These series of rotary bushing are suitable for API standard drill pipe slips, drill collar slips, casing slips and roller bushingt with 2 struc­tures :solid body and split body. Two drive types” are available: pin driven and square driven. It is designed and manufactured according to API Spec 7K ~Specification For Drilling and well servicing Equipment”.

Technical Specifications

Model Rotary table size (in) Insert bowl Tubular OD (in)
  17l/2-23 nsert Bowl 1011 23/8-75/8
  Insert Bowl 1571 23/g-85/g
 MSS (Solid)   Insert Bowl 1571 2^8-7^
27% Insert Bowl 1571 23/8-85/8
  Insert Bowl 1026 95/8-103/4
    Insert Bowl 2002 11 j/4-13%
MSS (Split) 17’/2-27’/2 / 23/r75/8
    Insert Bowl 1809 23/g-85/g
  20V222V2 Insert Bowl 1902 95/8-103/4
MSPC (Solid) Master bushing 1805-1 nVj-isVg
  Master bushing 19333 113/4-133/s
  NO.3 Insert Bowl 1810 2 /g-8 /g
  23-27% NO.2 Insert Bowl 1904 95/8-103/4
    NO.l Insert Bowl 1903 11 “4-13%
MDSP (Split) \7l/2-20l/2 / 23/8~85/g
MSP (Split) 27% / 23/g-85/8
    NO.3 Insert Bowl 6608 23/8-85/g
MPCH 37’/2 NO.2 Insert Bowl 6609 9VlOJ/4
  NO.l Insert Bowl 6610 11 V4-l 3%
  49’/2 MPCH 37’/2 2V137*

 

CASING BUSHING AND INSERT BOWLS SERIES
Casing bushing is combined by bushing body and insert bowls. It is suitable for handling casing less than 30 in. There are 2 types: solid and split. CU and CUL are solid bushing, and CB is split bushing.
Technical Specification

Rotary Tabic Size Model Tubular OD (in)
2 3/8- 8 5/8 95/8-103/4 113/4-133/8 16 185/g-20 24 26 30
17 1/2-20 1/2 CU Bushing
3102+ Insert Bowl 1809
Bushing
3102+ Insert Bowl 1902
Bushing3102 / / / / /
27 1/2 CUL Bushing
3103+ Insert Bowl 3105+1809
Bushing
3103+ Insert Bowl 3105+1902
Bushing 3103+ Insert Bowl
3105
Bushing
3103+ Insert Bowl 3104
Bushing 3103 / / /
CB Bushing 6695+ Insert Bowl 6126+6115 Bushing 6695+ Insert Bowl 6126+6114 Bushing 6695+ Insert Bowl
6126
Bushing 6695+ Insert Bowl 6127 Bushing 6695 / / /
37 1/2 Bushing
10187+ Insert Bowl 6126+6115
Bushing
10187+ Insert Bowl 6126+6114
Bushing 10187+ Insert Bowl
6126
Bushing
10187+ Insert Bowl 6127
Bushing 10187 Bushing
11253
Bushing
16454
Bushing
11763

US $15,000
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO 9001:2008, API
Power Source: Hydraulic
Operation Pressure: Atmospheric Pressure
Applicable Medium: Crude Oil
Structure: Horizontal
Material: Cast Steel

###

Customization:

###

Model DSL-110 DSL-135
Max. static load kN 1100 1350
US ton 120 150
Dynamic load rating kN 600 1080
US ton 65 120
Max. speed
 
rpm 150 150
MPa 35 35
Max. pressure
 
psi 5000 5000
N.m 8450 16000
Max. torque ft.lbf 6300 11800
Gooseneck connection 3LP 3LP
Sub connection 31/2 IF 31/2 IF
Size mm 2361x953x865 2480x1180x950
in 93×37.5×34 97.5×46.5×37.5
Weight kg 910 1400
lb 2000 3080

###

Model XSL160.2C XSL225.2C            XSL315.2C            XSL450.2C
Air pressure MPa 0.7~0.9
psi 101~130
Rated torque N.m 1300 1600
ft.lbf 959 1180
Brake torque N.m 1600 2500
ftlbf 1180 1840
Rated speed rpm 80 70
Rotating direction   Single direction Double direction
Size mm 608X450X440 740X565X475
in 24X18X17 29X21X19
Weight kg 218 272
lb 480 600
Suited for SL135, SL170 SL225,SL315,SL450

###

Model XSL160.2B XSL225.2B
Rated flow L/min 114
gpm 30.1
Rated pressure MPa 12
psi 1740
Rated torque N.m 2590 2850
ft.lbf 1910 2100
Rated speed rpm 66 70
Size mm 817X626X486 900X750X550
in 32.1X24.6X19.1 35.4X29.5X21.7
Weight kg 280 350
lb 617 772
Suited for SL135,SL170 SL225

###

Model HDS 27-HDP 20-HDP MDS 20-MDP 17-MDP LDS  
Type Heavy Medium Light  
Max. torque N.m 32365 22555 13729  
ft.
lbf
23871 16636 10126  
 
Drive Mode   Square Pin Square Pin Square  
 
Square in 3~6 2 1/2~5 1/4 2 1/2~ 4 1/4 2 1/2 ~5 1/4  
Hex in 3~6 3 ~ 4 1/4 3 ~ 4 1/4  
  mm 630X630X740 630X630X780 493X493X696 510X510X720 458X458X700 508 X 508X 700  
Size in 24.8X24.8X29.1 24.8X24.8X30.7 19.4X19.4X27.4 20 X 20 X 28.3 18X18X27.5 20X 20X 27.5  
  kg 700 730 670 500 460 340 400  
Weight lb 1540 1610 1470 1100 1012 750 808  

###

Model FXD                       QF2 Q3 A6C 6600 6800
Drive mode Pneumatic Driven Hydraulic Driven
Max. static load kN 2250
Us tom 250
Pressure MPa 0.5-0.9 13.8
psi 72-130 2000
Brake torque Nm 1200 1600 1650 1500 1500 1650
ft.lbf 885 1180 1215 1100 1100 1215
die speed rpm 76 72 72 170 130 110
Rotating direction Single Double
Stem connection 6-5/8 REG LH
Size mm 845X740X725 558X558X935 860X725X980 768X768X1225 740X710X978 740X710X978
in 33X29X28 22X22X37 34X28X39 30X30X48 29X28X38.5 29X28X38.5
Weight kg 383 450 520 540 500 504
lb 844 992 1146 1190 1100 1110

###

Model QD622-450(API500) QD450(API500) QD315(API350) QD135(API150)
Applicable range mm 324-622 89-356 89-340 60-139.7
in 123/4~24 ‘/2 3’/2-14 3’/2-133/8 23/8-5’/2
Rated load kN 4500 4500 3150 1350(3’/2)> 900(5’/2)
US ton 500 500 350 150(3’/2) ^     100(5’/2)
Air pressure MPa 0.5-0.9
psi 72-130
Size elevator mm 1886X1470X1070 1390X1290X915 1335X1040X806 990X645X550
in 74.3X57.9X42.1 55X51X36 52.5X41X31.7 39X25.4X21.6
spider mm 1886X1470X970 1390X1290X970 1335X1040X872 810X730X560
in 74.3X57.9X38.2 55X51X38 52.5X41X34.2 31.9X28.7X22
Weight kg 12000 9900 7550 1430
lb 26450 21820 16640 3152

###

Model ZP375 ZP275 ZP205 ZP175
Max. static load kN 5850 4500 3150 1350
US ton 650 500 350 150
Bore diameter mm 952.5 698.5 520.7 444.5
in 37’/2 27% 20% 17’/2
Gear ratio   3.56 3.67 3.22 3.58
Distance from table axis to the center of inner row of sprocket mm 1353 1353 1353 1118
in 531/4 531/4 531/4 44
Size mm 2468X1810X718 2392X1670X685 2292X1475X668 1935X1280X585
in 97X71X28 94X66X27 90X58X26 76X50X23
Weight kg 8026 6203 5530 3888
lb 17694 13680 12190 8572

###

Model Rotary table size (in) Insert bowl Tubular OD (in)
  17l/2-23 nsert Bowl 1011 23/8-75/8
  Insert Bowl 1024 23/g-85/g
 MSS (Solid)   Insert Bowl 1022 2^8-7^
27% Insert Bowl 1025 23/8-85/8
  Insert Bowl 1026 95/8-103/4
    Insert Bowl 2002 11 j/4-13%
MSS (Split) 17’/2-27’/2 / 23/r75/8
    Insert Bowl 1809 23/g-85/g
  20V222V2 Insert Bowl 1902 95/8-103/4
MSPC (Solid) Master bushing 1805-1 nVj-isVg
  Master bushing 19333 113/4-133/s
  NO.3 Insert Bowl 1810 2 /g-8 /g
  23-27% NO.2 Insert Bowl 1904 95/8-103/4
    NO.l Insert Bowl 1903 11 "4-13%
MDSP (Split) \7l/2-20l/2 / 23/8~85/g
MSP (Split) 27% / 23/g-85/8
    NO.3 Insert Bowl 6608 23/8-85/g
MPCH 37’/2 NO.2 Insert Bowl 6609 9VlOJ/4
  NO.l Insert Bowl 6610 11 V4-l 3%
  49’/2 MPCH 37’/2 2V137*

###

Rotary Tabic Size Model Tubular OD (in)
2 3/8- 8 5/8 95/8-103/4 113/4-133/8 16 185/g-20 24 26 30
17 1/2-20 1/2 CU Bushing
3102+ Insert Bowl 1809
Bushing
3102+ Insert Bowl 1902
Bushing3102 / / / / /
27 1/2 CUL Bushing
3103+ Insert Bowl 3105+1809
Bushing
3103+ Insert Bowl 3105+1902
Bushing 3103+ Insert Bowl
3105
Bushing
3103+ Insert Bowl 3104
Bushing 3103 / / /
CB Bushing 6695+ Insert Bowl 6126+6115 Bushing 6695+ Insert Bowl 6126+6114 Bushing 6695+ Insert Bowl
6126
Bushing 6695+ Insert Bowl 6127 Bushing 6695 / / /
37 1/2 Bushing
10187+ Insert Bowl 6126+6115
Bushing
10187+ Insert Bowl 6126+6114
Bushing 10187+ Insert Bowl
6126
Bushing
10187+ Insert Bowl 6127
Bushing 10187 Bushing
11253
Bushing
16454
Bushing
11763
US $15,000
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO 9001:2008, API
Power Source: Hydraulic
Operation Pressure: Atmospheric Pressure
Applicable Medium: Crude Oil
Structure: Horizontal
Material: Cast Steel

###

Customization:

###

Model DSL-110 DSL-135
Max. static load kN 1100 1350
US ton 120 150
Dynamic load rating kN 600 1080
US ton 65 120
Max. speed
 
rpm 150 150
MPa 35 35
Max. pressure
 
psi 5000 5000
N.m 8450 16000
Max. torque ft.lbf 6300 11800
Gooseneck connection 3LP 3LP
Sub connection 31/2 IF 31/2 IF
Size mm 2361x953x865 2480x1180x950
in 93×37.5×34 97.5×46.5×37.5
Weight kg 910 1400
lb 2000 3080

###

Model XSL160.2C XSL225.2C            XSL315.2C            XSL450.2C
Air pressure MPa 0.7~0.9
psi 101~130
Rated torque N.m 1300 1600
ft.lbf 959 1180
Brake torque N.m 1600 2500
ftlbf 1180 1840
Rated speed rpm 80 70
Rotating direction   Single direction Double direction
Size mm 608X450X440 740X565X475
in 24X18X17 29X21X19
Weight kg 218 272
lb 480 600
Suited for SL135, SL170 SL225,SL315,SL450

###

Model XSL160.2B XSL225.2B
Rated flow L/min 114
gpm 30.1
Rated pressure MPa 12
psi 1740
Rated torque N.m 2590 2850
ft.lbf 1910 2100
Rated speed rpm 66 70
Size mm 817X626X486 900X750X550
in 32.1X24.6X19.1 35.4X29.5X21.7
Weight kg 280 350
lb 617 772
Suited for SL135,SL170 SL225

###

Model HDS 27-HDP 20-HDP MDS 20-MDP 17-MDP LDS  
Type Heavy Medium Light  
Max. torque N.m 32365 22555 13729  
ft.
lbf
23871 16636 10126  
 
Drive Mode   Square Pin Square Pin Square  
 
Square in 3~6 2 1/2~5 1/4 2 1/2~ 4 1/4 2 1/2 ~5 1/4  
Hex in 3~6 3 ~ 4 1/4 3 ~ 4 1/4  
  mm 630X630X740 630X630X780 493X493X696 510X510X720 458X458X700 508 X 508X 700  
Size in 24.8X24.8X29.1 24.8X24.8X30.7 19.4X19.4X27.4 20 X 20 X 28.3 18X18X27.5 20X 20X 27.5  
  kg 700 730 670 500 460 340 400  
Weight lb 1540 1610 1470 1100 1012 750 808  

###

Model FXD                       QF2 Q3 A6C 6600 6800
Drive mode Pneumatic Driven Hydraulic Driven
Max. static load kN 2250
Us tom 250
Pressure MPa 0.5-0.9 13.8
psi 72-130 2000
Brake torque Nm 1200 1600 1650 1500 1500 1650
ft.lbf 885 1180 1215 1100 1100 1215
die speed rpm 76 72 72 170 130 110
Rotating direction Single Double
Stem connection 6-5/8 REG LH
Size mm 845X740X725 558X558X935 860X725X980 768X768X1225 740X710X978 740X710X978
in 33X29X28 22X22X37 34X28X39 30X30X48 29X28X38.5 29X28X38.5
Weight kg 383 450 520 540 500 504
lb 844 992 1146 1190 1100 1110

###

Model QD622-450(API500) QD450(API500) QD315(API350) QD135(API150)
Applicable range mm 324-622 89-356 89-340 60-139.7
in 123/4~24 ‘/2 3’/2-14 3’/2-133/8 23/8-5’/2
Rated load kN 4500 4500 3150 1350(3’/2)> 900(5’/2)
US ton 500 500 350 150(3’/2) ^     100(5’/2)
Air pressure MPa 0.5-0.9
psi 72-130
Size elevator mm 1886X1470X1070 1390X1290X915 1335X1040X806 990X645X550
in 74.3X57.9X42.1 55X51X36 52.5X41X31.7 39X25.4X21.6
spider mm 1886X1470X970 1390X1290X970 1335X1040X872 810X730X560
in 74.3X57.9X38.2 55X51X38 52.5X41X34.2 31.9X28.7X22
Weight kg 12000 9900 7550 1430
lb 26450 21820 16640 3152

###

Model ZP375 ZP275 ZP205 ZP175
Max. static load kN 5850 4500 3150 1350
US ton 650 500 350 150
Bore diameter mm 952.5 698.5 520.7 444.5
in 37’/2 27% 20% 17’/2
Gear ratio   3.56 3.67 3.22 3.58
Distance from table axis to the center of inner row of sprocket mm 1353 1353 1353 1118
in 531/4 531/4 531/4 44
Size mm 2468X1810X718 2392X1670X685 2292X1475X668 1935X1280X585
in 97X71X28 94X66X27 90X58X26 76X50X23
Weight kg 8026 6203 5530 3888
lb 17694 13680 12190 8572

###

Model Rotary table size (in) Insert bowl Tubular OD (in)
  17l/2-23 nsert Bowl 1011 23/8-75/8
  Insert Bowl 1024 23/g-85/g
 MSS (Solid)   Insert Bowl 1022 2^8-7^
27% Insert Bowl 1025 23/8-85/8
  Insert Bowl 1026 95/8-103/4
    Insert Bowl 2002 11 j/4-13%
MSS (Split) 17’/2-27’/2 / 23/r75/8
    Insert Bowl 1809 23/g-85/g
  20V222V2 Insert Bowl 1902 95/8-103/4
MSPC (Solid) Master bushing 1805-1 nVj-isVg
  Master bushing 19333 113/4-133/s
  NO.3 Insert Bowl 1810 2 /g-8 /g
  23-27% NO.2 Insert Bowl 1904 95/8-103/4
    NO.l Insert Bowl 1903 11 "4-13%
MDSP (Split) \7l/2-20l/2 / 23/8~85/g
MSP (Split) 27% / 23/g-85/8
    NO.3 Insert Bowl 6608 23/8-85/g
MPCH 37’/2 NO.2 Insert Bowl 6609 9VlOJ/4
  NO.l Insert Bowl 6610 11 V4-l 3%
  49’/2 MPCH 37’/2 2V137*

###

Rotary Tabic Size Model Tubular OD (in)
2 3/8- 8 5/8 95/8-103/4 113/4-133/8 16 185/g-20 24 26 30
17 1/2-20 1/2 CU Bushing
3102+ Insert Bowl 1809
Bushing
3102+ Insert Bowl 1902
Bushing3102 / / / / /
27 1/2 CUL Bushing
3103+ Insert Bowl 3105+1809
Bushing
3103+ Insert Bowl 3105+1902
Bushing 3103+ Insert Bowl
3105
Bushing
3103+ Insert Bowl 3104
Bushing 3103 / / /
CB Bushing 6695+ Insert Bowl 6126+6115 Bushing 6695+ Insert Bowl 6126+6114 Bushing 6695+ Insert Bowl
6126
Bushing 6695+ Insert Bowl 6127 Bushing 6695 / / /
37 1/2 Bushing
10187+ Insert Bowl 6126+6115
Bushing
10187+ Insert Bowl 6126+6114
Bushing 10187+ Insert Bowl
6126
Bushing
10187+ Insert Bowl 6127
Bushing 10187 Bushing
11253
Bushing
16454
Bushing
11763

bushing bore
China Power Swivels Spinner and Bushing     bushing adapter	China Power Swivels Spinner and Bushing     bushing adapter
editor by czh 2022-11-24