China high quality Reducer Bushing of Hot and Cold Water Plastic Fitting ASTM D2846 Standard Plastic/CPVC/PVC/Pressure Pipe Fittings wholesaler

Product Description

PRODUCT DESCRIPTION
 

 Material  CPVC
 Specification  1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″
 Weight  48g
 Packing  carton
 Carton Size  50x30x27cm³
 Delivery Medium  Abt 35 days after  deposit 
 Application  Delivery Water
 Sample  Offer free samples
 OEM and ODM  YES

 

CPVC CTS PRESSURE PIPING SYSTEM (ASTM D2846) 

Chlorinated polyvinyl chloride (CPVC) is a unique polymer after polyvinyl chloride chlorination. Ordinary PVC molecular chlorine content is 45%, the chlorinated polyvinyl chloride (CPVC) molecules chlorine content is about 64% to 68%, up to more than 70%.

CPVC tensile capacity is higher than the UPVC, PPR, PP-B, PP- RH, PB, HDPE, PE, PE – X RT, etc.; its thermal expansion coefficient is lower than the PP, PE, PB; thermal conductivity is lower than that of PP, PE, PB and metal pipe; the temperature resistance and resistance to deformation ability is better than that of PP, UPVC, ABS and HDPE.

CPVC pipes are designed in copper tube size from 1/2″ to 2″ , with 2 kinds of standards dimensional ratios – SDR-11 and SDR-13.5. The fittings are designed with standard SDR-11. SDR13.5 pipe match the standard ASTM F442.

The specification of those products, which covers requirements, test methods, and methods of marking for components made in 1 standard dimension ratio and intended for water service, can match the standard ASTM D2846.

FEATURES OF PRODUCT

Safety and Health:

The extremely low rate of harmful bacteria breeding is superior to drinking water hygiene standard designed by both the World Health Organization and the People’s Republic of China Ministry of health. Thereby it was recommended for medical system.

Flame Retardant:

Limited oxygen index of CPVC material is 60%. The minimum ignition temperature is 482*C. No dropping fire, very low smoke rate and no poisonous gas.

Corrosion Resistant:

CPVC material has strong resistance to acid and alkali, which can be used for delivering liquid of HCL and NaOH.

Low Thermal Expansion Coefficient:

CPVC material has low coefficient of thermal expansion. Expansion loop length is 16 feet, under the condition of 100F temperature change and 20′ holding.

Anti Ultraviolet:

The ultraviolet rays will not cause breakage of polymer chains structure.

Long Service Life:

CPVC material has strong antioxidant and aging resistance performance than other material in utilization.

FIELDS OF APPLICATION

Hot and cold water applications in homes, apartments, hotels, resorts, hospitals, high and low rising buildings, corporate and commercial houses, academic institutes etc

Piping networks for pure water and medicament in pharmaceutical factory

Piping networks for beverage, dairy and drinking water supply

 

SERVICE

1. We are a manufacturer of plastic tubes and fittings. We accept OEM business.

2. We supply stop valve,pipe end cap,equal/reduceing tee,cold hot water ball valve,union ball valve,threaded elbow(plastic or with metal) and so on.

3. We also supply the connectors Accordingly.

4. We can offer you very competitive prices for some pipes.

5. We welcome you to visit our web and our factory. Your visiting will be highly appreciated.

6. It is my pleasure to help you.

7.If you need more customized services and offers,Please Contact Us.

 

MORE PRODUCT

 

OUR ADVANTAGE

1.high quality&industrial leading price

2.quick order processing & on-time delivery

3.extremely long usage life for at least 5 years

4.innovative & customer-oriented

5.rich experience in exportation

6.best quality & best service with competitive price

7.easy and fast installation, making cost minimized

8.healthy and non-toxic, free of stain,recycable, enviromentally friendly

9.Modern technical equipment in combination with proficient manual work.

10.Lightweight, convenient to transport and handle, good for labor-saving.

 

ABOUT TIANYAN

(1) CHINAMFG Factory

It is a CHINAMFG solution provider for plastic piping system in the world,whose customers come from more than 60 countries and regions.Building piping system application,industrial piping system application,agricultural piping system application,and their professional solutions are the mainly business

(2) Customization
(3) Social Responsibility

(4) 6S Management

(5) Certificate

(6) Process Quality Control
(7) Each Process is CareFully Made

(8) Packing & Delivery


FAQ

1. Are you a manufacture or trading company?
We are a well-known solution provider for plastic piping system in the world with 26 years professional experience. Welcome to visit and investigate us, you would find the difference with others.
2. Do you offer OEM service?
Yes. We have our famous brand name. But we can offer OEM service also, with same quality. We can review and accept customer design, or design based on customer requirements, by our professional R&D team.
3.Why Choose Us?
Trust in our experience.
We supply many different standards professional products for more than 60 countries and areas in the world.
Trust in our authority.
We had many professional inspections and certificates. We had passed inspections of CE,  SGS, and get the certificates of ISO 9001, ISO 14001, OHSAS 18001, and WRAS, and so on.
Trust in our solutions.
We have professional R&D team, QA&QC team, marketing team. We have many patents and awards, can supply highest quality OEM products, and help you and do with you to settle any kind of logistical problems.
Trust in our production capacity.
We have more than 30 pipe extruding machines, and 200 injection molding machines. And those figures still increase each year.
Trust in our financial management capacity.
We obtain the “ZHangZhoug Top Export Brand” by government. We have the ability to make each your US cent efficient. Each cent, which you pay us, would be worth.
4.How to Get a Sample?
Please apply sample.
We can apply free sample for inspection, after the prices confirmed.
Sample is free.
We would supply you sample for free, and freight is collected, if you need a sample to confirm. You also can pay freight to us in advance, and let us prepaid freight, if you thought the prepaid freight is lower than collected freight.
Freight is free.
We will undertake the freight, and pay the money into your deposit, if you give the order to us finally.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24 Hours After-Serive
Warranty: 5 Year
Connection: Welding
Shape: Equal
Head Code: Round
Angle: 90 Degree
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

plastic bush

Can I get advice on choosing plastic bushings for noise reduction in machinery or equipment?

If you are seeking advice on choosing plastic bushings for noise reduction in machinery or equipment, consider the following factors:

1. Material Selection:

– Look for plastic bushings made from materials specifically designed for noise reduction, such as acetal (POM), nylon, or polyurethane. These materials have inherent damping properties that can help reduce vibrations and noise.

– Consider the operating conditions of your machinery or equipment. Ensure that the chosen plastic bushings can withstand the temperature, humidity, and chemical exposure of the application environment.

2. Design and Fit:

– Choose bushings with a design that matches the specific requirements of your machinery or equipment. Consider factors such as the load-bearing capacity, clearance, and fit tolerance.

– Opt for bushings with a tight fit to minimize movement and vibration, which can contribute to noise generation. A snug fit can help dampen vibrations and reduce noise effectively.

3. Lubrication and Maintenance:

– Plastic bushings often require lubrication to minimize friction and noise. Consider whether the chosen bushings need periodic lubrication or if they are self-lubricating.

– Evaluate the maintenance requirements of the bushings. Some plastic bushings may require regular inspection and replacement if they wear out quickly, while others have a longer lifespan.

4. Compatibility and Performance:

– Ensure that the chosen plastic bushings are compatible with the machinery or equipment they will be used in. Consider factors such as shaft material, surface finish, and operating speed to ensure optimal performance.

– Look for bushings that have been specifically tested or certified for noise reduction applications. Manufacturers may provide information on noise reduction capabilities, such as decibel reduction or noise attenuation levels.

5. Expert Advice and Supplier Support:

– Consult with experts or suppliers specializing in plastic bushings for noise reduction applications. They can provide valuable guidance based on their knowledge and experience.

– Explain your specific requirements and provide details about the machinery or equipment to receive tailored recommendations and ensure the best possible noise reduction solution.

By considering material selection, design and fit, lubrication and maintenance, compatibility and performance, and seeking expert advice and supplier support, you can make an informed decision when choosing plastic bushings for noise reduction in machinery or equipment. Prioritize noise reduction properties while ensuring compatibility with the application and considering long-term performance and maintenance needs.

plastic bush

Can I get guidance on selecting plastic bushings based on factors like load capacity, speed, and temperature?

Yes, you can obtain guidance on selecting plastic bushings based on factors such as load capacity, speed, and temperature. Considering these factors is crucial for choosing the appropriate plastic bushings that can withstand the specific operating conditions of your application. Here are some sources that can provide guidance on selecting plastic bushings:

  • Manufacturer Documentation: Manufacturers of plastic bushings often provide technical documentation, catalogs, or product datasheets that include information on load capacity, speed limits, and temperature ratings. These resources typically outline the performance characteristics and specifications of different bushing materials and can guide you in selecting the most suitable bushings for your application. Visit the websites of reputable manufacturers or contact their customer support for access to these resources.
  • Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to mechanical design, tribology, or materials science can offer valuable guidance on selecting plastic bushings. These resources often provide formulas, charts, and guidelines for calculating load capacity, considering speed limitations, and understanding temperature effects on various materials. Look for industry-standard handbooks or reference guides that cover topics relevant to your application and consult the sections on bushing selection.
  • Industry Associations and Standards Organizations: Industry associations and standards organizations in the machinery, automotive, or related sectors may have published guidelines or standards for selecting plastic bushings based on load capacity, speed, and temperature considerations. Visit their websites or contact them directly to inquire about any available resources or recommendations. These organizations often have technical committees and experts who can provide valuable guidance based on industry best practices.
  • Consulting with Application Engineers: If you require more personalized guidance, consider consulting with application engineers or technical experts who have expertise in the field of bushing selection. Application engineers can assess your specific application requirements, including load capacity, speed, and temperature, and make recommendations based on their experience and knowledge. Reach out to plastic bushing manufacturers, suppliers, or engineering consulting firms to inquire about their consulting services.
  • Online Forums and Communities: Participating in online forums and communities focused on machinery, engineering, or tribology can provide access to collective knowledge and experiences of professionals in the field. Engage in discussions, ask questions, and seek guidance on selecting plastic bushings based on load capacity, speed, and temperature requirements. Experienced members of these communities can often provide practical insights and recommendations.

When selecting plastic bushings, it’s important to consider not only the load capacity, speed, and temperature requirements but also factors such as the specific application environment, chemical compatibility, and maintenance considerations. It’s recommended to gather information from multiple sources and consult with experts to ensure the most suitable selection for your application.

By utilizing the available guidance and expertise, you can make informed decisions when selecting plastic bushings, considering factors such as load capacity, speed limits, and temperature requirements, thereby optimizing the performance and reliability of your machinery or equipment.

plastic bush

Are there different types of plastic materials used in manufacturing plastic bushings, and how do they affect performance?

Yes, there are different types of plastic materials used in manufacturing plastic bushings, and the choice of material can significantly affect their performance. Here are some common types of plastic materials used in plastic bushings and how they can impact performance:

  • Nylon: Nylon is a widely used material for plastic bushings. It offers good wear resistance, low friction, and excellent load-carrying capacity. Nylon bushings are self-lubricating, reducing the need for additional lubrication. They are suitable for a wide range of applications and can operate in both dry and lubricated conditions.
  • PTFE (Polytetrafluoroethylene): PTFE, commonly known by the brand name Teflon, is a high-performance plastic material with exceptional low-friction properties. PTFE bushings have excellent chemical resistance, operate well in high-temperature environments, and exhibit low wear rates. They are often used in demanding applications where high precision and low friction are critical.
  • UHMW (Ultra-High-Molecular-Weight Polyethylene): UHMW is a durable and tough plastic material known for its high impact strength and abrasion resistance. UHMW bushings offer low friction, good chemical resistance, and excellent wear properties. They are commonly used in applications involving heavy loads, impact, or abrasive conditions.
  • POM (Polyoxymethylene): POM, also known as acetal or Delrin, is a high-strength engineering plastic with good dimensional stability and low friction. POM bushings exhibit low moisture absorption, excellent wear resistance, and a low coefficient of friction against metal surfaces. They are suitable for applications requiring high precision, low wear, and resistance to moisture or chemicals.
  • Composite Polymers: Composite polymers are materials that combine different plastic resins or incorporate reinforcing fibers or fillers. These composite materials can offer enhanced mechanical properties such as increased strength, improved wear resistance, or reduced friction. Composite polymer bushings are tailored for specific applications, and the choice of composite formulation depends on the desired performance characteristics.

The choice of plastic material for a specific application depends on various factors, including the operating conditions, load requirements, temperature range, speed, and environmental factors. Each plastic material has its own unique properties and advantages, which make them suitable for specific applications. For example, nylon bushings may be preferred for their balanced performance and versatility, while PTFE bushings excel in applications requiring low friction and high temperature resistance.

When selecting a plastic material for bushings, it’s important to consider factors such as load capacity, wear resistance, coefficient of friction, chemical resistance, temperature range, and compatibility with mating surfaces. Manufacturers and suppliers of plastic bushings can provide guidance on selecting the appropriate material based on your specific application requirements.

It’s worth noting that the performance of plastic bushings can be influenced by factors such as design considerations, surface finish, mating materials, and operating conditions. Proper installation, regular maintenance, and adherence to manufacturer guidelines are crucial for achieving optimal performance and longevity of plastic bushings in industrial applications.

By understanding the different types of plastic materials available and their impact on performance, you can make informed decisions when selecting plastic bushings for your specific application needs.

China high quality Reducer Bushing of Hot and Cold Water Plastic Fitting ASTM D2846 Standard Plastic/CPVC/PVC/Pressure Pipe Fittings   wholesaler China high quality Reducer Bushing of Hot and Cold Water Plastic Fitting ASTM D2846 Standard Plastic/CPVC/PVC/Pressure Pipe Fittings   wholesaler
editor by CX 2024-03-28